Mismoosh Ltd

Loading

Power / Fans / PCIe

  • Akasa G-Nexus PX16 90 Degree 12VHPWR Cable, 12+4-pin to 12+4-pin Extension Cable, Supports up to 600W, 300mm



    90 Degree 12VHPWR Cable

    Innovative 12VHPWR Connector. 12+4-pin extension cable, designed to easily extend your connection by 300mm. This enhances cable management, providing both convenience and flexibility.
     
    • 12+4-pin to 12+4-pin extension cable
    • 90 degree connection
    • Supports up to 600W
    • Compact and aesthetic design
    • Better case spacing
     
     
     
     
    90 Degree Connection

    An angled connection eliminates the necessity for wire bending, preventing additional stress on both the cable and the graphics card connector.
     
    Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the backplate side, located above the 12-pins.





    Supports Up to 600W

    Supports up to 600W of power with the added reliability of 16 AWG for lower power loss. Perfect for latest NVIDIA RTX 40 Series GPUs & ATX 3.0 PSUs with 16-Pin connector.





    Better Case Spacing

    The compact design enables the use of smaller cases by providing improved panel clearance, all while maintaining an elegant appearance thanks to its stylish pattern.




     
    Compact and Aesthetic Design

    The compact design not only saves space for easier cable management but also retains its elegant and discrete appearance. Coupled with 300mm cable length for easy power connection.





    Recommended Guide:

    - Refrain from utilising cables that are not standard configuration
    - Ensure adapters and cables are kept away from heat sources
    - Avoid daisy chaining or using additional adapter cables
     
    To prevent incorrect operation and the risk of the connector overheating and melting, it's essential to ensure a complete and secure connection between connectors.

     

    Original price was: £18.04.Current price is: £17.42.
  • Akasa PWM Fan Splitter Cable, 2 PWM Fans from Single PWM Header, 15cm


    Smart connection of two fans from single motherboard PWM header, enables quiet operation of performance systems, length: 15cm

    Original price was: £3.02.Current price is: £2.91.
  • ARCTIC 4-pin PWM Fan Splitter Cable – PST Splitter Cable for 4 Case Fans



    Increase Your Ventilation

     
    Even if you don't have enough fan headers on your motherboard, the 4-Pin PWM Fan Splitter Cable allows you to connect up to 4 case fans to a single header. If this is not enough, ARCTIC also offers the Case Fan Hub, an accessory that has 10 fan slots and is powered directly by SATA power.




     
    Improved Cable Management

    The 4-Pin PWM Fan Splitter Cable makes it easier to manage your cables, allowing you to easily place fans at any position in your case. The 70 cm distance to the first fan connector allows you to run the cable in an area of the case where it is not visible.




     
    Synchronous Fan Control

    Your configured PWM signal will be synchronously sent to all fans which are connected to the 4-Pin PWM Fan Splitter Cable. The RPM of the first fan socket will be read out and fed back to your system.

     


     
    Minimal Cross-Section - Maximum Flexibility

    ARCTIC uses the same materials for the 4-Pin PWM Fan Splitter Cable as for the case fan cables. These materials have proven to be durable and flexible. Additional sheathing was intentionally omitted in order to keep the cross-section small. This allows the cables to be incorporated inconspicuously into the existing cable management system and also to be routed through narrow areas of the case.




     
    Voltage Control Is Also Possible

    The 4-Pin PWM Fan Splitter Cable is also compatible with 3-pin fans and connectors. This allows the fan speed to be controlled via the voltage and is passed on to all connected fans. As with 4-pin PWM fans, the speed of the first fan is read out, while the fourth pin remains free.

     

     
    Original price was: £2.28.Current price is: £2.20.
  • Asrock 12V-2×6 600W / L-Type Cable, Compliant to ATX 3.1 & PCIe 5.1, 90° Connector

     
     

    12V-2x6 600W / L-Type Cable

    • Compliant to ATX 3.1 and PCIe 5.1
    • Dual Color Design
    • Cable Over-Temperature Protection (ASRock Taichi / Phantom Gaming Series PSU Only)
    • The 12V-2x6 format is backwards compatible with 12VHPWR
    • L-Type 12V-2x6 connector (GPU side) to 12V-2x6 connectors (PSU side)
    • Maximum 600 W rated power
    • 16 AWG (American Wire Gauge) size
    • HCS (High-Current System) terminals with 94V-0 plastic material for 12V-2x6 connector housing
    • Power supply requirement 750W and above
     
     
     

     
    Space-Saving 90° Connector

    Easily connect your GPU without worrying about cable bend radius. The right-angled design allows closer installation and better cable management.
    Note: Compatibility may vary by GPU model. Ensure that all four signal pins are aligned correctly on the connector side.
     
    RECOMMENDATION on how to use our 12V-2x6 cable
    • Please follow the recommendations of your VGA card manufacturer on the power requirement.
    • 12V-2x6 connectors must be plugged in at all times to your power supply.
    • All connectors must be INSERTED, CLICK-LOCKED and SEATED properly.
    • DO NOT bend the cable in any direction once it is plugged into place.
    • DO NOT bend or apply force to the cable too close to the connector.
     
     
     
     
     
    Native PCIe 12V-2x6 Cable
    • Dual Color Design - With ASRock Classic Green connectors, users can easily see if the connector has been plugged properly.
    • Cable Over-Temperature Protection - The NTC sensor at the VGA connector monitors the temperature and sends signal the PSU to ensure safe operation (ASRock Taichi / Phantom Gaming Series PSU Only)
     
     
     

     
    Durable & Stylish

    Sleeved cable in an elegant all-black finish-built for flexibility, durability, and a neat setup.
    Includes customizable stickers-choose from Taichi, Phantom Gaming, or Steel Legend to match your build.
     
     
     
     

     
    Reliable Performance with Long-Term Durability

    Engineered for longevity and backed by ASRock's 2-year warranty, this cable is built to deliver consistent power up to 600W to your GPU without compromise.
    Note: The plug must be fully inserted and flush with the graphics card for proper functionality.
     
     
    Original price was: £18.11.Current price is: £17.49.
  • Corsair 600W PCIe 5.0 12VHPWR Type-4 PSU Power Cable



    The official CORSAIR 600W PCIe 5.0 / Gen 5 12VHPWR PSU Power Cable delivers power from CORSAIR Type-4 PSUs to the most advanced PCIe 5.0 graphics cards.


     

    Power Your Gen 5.0 GPU With Your Existing Power Supply Unit
    If your CORSAIR PSU can handle the power requirements of the PCIe 5.0 GPU, all you need is a cable that does as well.
     


     
    Up to 600W TDP
    Connect The Most Advanced PCIe 5.0 Graphics Cards
    This high-quality cable reliably delivers power from your CORSAIR PSU to the latest PCIe 5.0 graphics cards, without the need for a 12+4pin adapter.
     
    You can use the cable with any Type-4 connector-compatible CORSAIR power supply via a dual 8-pin PCIe connection.

     

     
    Fully Compatible
    Guaranteed for use with all Type 4 CORSAIR PSUs.
    To see if your PSU is compatible, check here
     

     

    Original price was: £12.12.Current price is: £11.70.
  • Jedel UK Power Lead, Cloverleaf, Moulded Plug, 1.8 Metres


    1.8M 3 Pin MainsClover Leaf C5 Power Lead For Laptops
     
    • 250V AC,5AMPS
    • Sand Fuse
    Original price was: £2.38.Current price is: £2.30.
  • Spire UK Power Lead, Cloverleaf, Moulded Plug, 1.8 Metres

     

    UK Mains to C5 Mains Lead (Clover Leaf)

    The C5 to UK mains cable, more commonly know as a clover leaf lead is used for powering some laptops, mobile projectors and also can be found on the Apple iMAC G4 desktop computer and other home electrical appliances.

     
    The PVC connectors are moulded to provide a high quality cable which is perfect for home or office use.
    Original price was: £2.73.Current price is: £2.63.
  • Spire UK Power Lead, Figure 8, Moulded Plug, 1.8 Metres

    • UK - C7 Mains Lead
    • 1.8 mtr
    • Moulded
    • 3A fuse (2.5A C7 connector)
    • Approved by A.S.T.A
    • N14848
     
     
    The C7 to UK mains cable, more commonly know as a figure 8 lead is used for powering some low powered appliances such as portable CD players, audio/video equipment and some laptop power supplies.
     
    The PVC connectors are moulded to provide a high quality cable which is perfect for home or office use.
     
    These are inpidually hanked for convenience.
    Original price was: £3.23.Current price is: £3.12.
  • Spire UK Power Lead, Kettle Lead, Moulded Plug, 5A, 1.8 Metres

    • Non-rewireable, fully moulded
    • Integral 13A plug with 5A fuse
    • Manufactured from 0.75mm2 approved 3-core cable
    • Black, PVC jacket
    • 1.8 M ASTA Certified Kettle Lead
    • Power Mains Cable H05VV-F 5A Fuse OD 7.0mm
     
     
    Original price was: £3.84.Current price is: £3.71.