Mismoosh Ltd

Loading

Brand: ARCTIC

ARCTIC

  • Sale! ARCTIC 10-port PWM Fan Hub with SATA Power Quick View

    ARCTIC 10-port PWM Fan Hub with SATA Power


    10 Port PWM Fan Hub with SATA Power

     
    Centralised Cable Management
    The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing.
     
     
    Synchronous Fan Control
    Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system.
     
     
    Expand your Ventilation
    Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots.
     
     
    External Power Supply
    The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.
    Original price was: £5.10.Current price is: £4.93.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC 120mm P12 Pressure Optimised PWM PST ARGB Case Fan, Fluid Dynamic, 12 LEDs, 0-2000 RPM, 0dB Mode, Black Quick View

    ARCTIC 120mm P12 Pressure Optimised PWM PST ARGB Case Fan, Fluid Dynamic, 12 LEDs, 0-2000 RPM, 0dB Mode, Black


    Semi-Passive 120 mm Fan with Digital A-RGB
     

    • Optimised for high static pressure
    • Ideal choice on heatsinks, radiators and (partly-) covered case vents
    • PWM Sharing Technology (PST) regulates fan speed synchronously
    • Static Pressure: 1.85 mm H2O


     
    RGB For Full Colour Control
    The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

     
     
    0DB Mode - Zero RPM
    The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

     
     
    Maximum Smoothness, Minimum Vibration
    The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB 0dB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

     
     
    Optimised For High Static Pressure
    The P12 PWM PST A-RGB 0dB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
     

     
    0 TO 2000 RPM Controlled Via PWM PST
    With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB 0dB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
     

     
    High Quality Plain Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.
    Original price was: £9.51.Current price is: £9.18.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC 140mm P14 Semi-Passive PWM PST ARGB Case Fan, Fluid Dynamic, 12 LEDs, 200-1900 RPM, 0dB Mode Quick View

    ARCTIC 140mm P14 Semi-Passive PWM PST ARGB Case Fan, Fluid Dynamic, 12 LEDs, 200-1900 RPM, 0dB Mode


     

    Semi-Passive 140 mm Case Fan with Digital A-RGB
     

    • Addressable RGB for Full Colour Control
    • 0dB Mode - Zero RPM
    • Maximum Smoothness, Minimum Vibration
    • Optimised for High Static Pressure
    • 200 to 1900 RPM Controlled via PWM PST
    • High Quality Fluid Dynamic Bearing
    • 6 Year Warranty
     
     
     
     
    Addressable RGB for Full Colour Control

    The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
     



     
    0dB Mode - Zero RPM

    The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.



     
     
    Maximum Smoothness, Minimum Vibration

    The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
     



     
    Optimised for High Static Pressure

    The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.



     
     
    200 to 1900 RPM Controlled via PWM PST

    With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
     



     
    High Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.




     
    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWN PST A-RGB.

     

    Original price was: £11.18.Current price is: £10.79.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC 4-pin PWM Fan Splitter Cable - PST Splitter Cable for 4 Case Fans Quick View

    ARCTIC 4-pin PWM Fan Splitter Cable – PST Splitter Cable for 4 Case Fans



    Increase Your Ventilation

     
    Even if you don't have enough fan headers on your motherboard, the 4-Pin PWM Fan Splitter Cable allows you to connect up to 4 case fans to a single header. If this is not enough, ARCTIC also offers the Case Fan Hub, an accessory that has 10 fan slots and is powered directly by SATA power.




     
    Improved Cable Management

    The 4-Pin PWM Fan Splitter Cable makes it easier to manage your cables, allowing you to easily place fans at any position in your case. The 70 cm distance to the first fan connector allows you to run the cable in an area of the case where it is not visible.




     
    Synchronous Fan Control

    Your configured PWM signal will be synchronously sent to all fans which are connected to the 4-Pin PWM Fan Splitter Cable. The RPM of the first fan socket will be read out and fed back to your system.

     


     
    Minimal Cross-Section - Maximum Flexibility

    ARCTIC uses the same materials for the 4-Pin PWM Fan Splitter Cable as for the case fan cables. These materials have proven to be durable and flexible. Additional sheathing was intentionally omitted in order to keep the cross-section small. This allows the cables to be incorporated inconspicuously into the existing cable management system and also to be routed through narrow areas of the case.




     
    Voltage Control Is Also Possible

    The 4-Pin PWM Fan Splitter Cable is also compatible with 3-pin fans and connectors. This allows the fan speed to be controlled via the voltage and is passed on to all connected fans. As with 4-pin PWM fans, the speed of the first fan is read out, while the fourth pin remains free.

     

     
    Original price was: £2.28.Current price is: £2.20.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC 40mm Fan Grill, Nickel Plated Steel Quick View

    ARCTIC 40mm Fan Grill, Nickel Plated Steel



    Protection for your Fan - Size 40 mm

    • Effective Protection - Protects the fans from external objects and prevents cable damage. The Fan Grill is attached in front of the fan with enclosed screws and protects from hanging cables and the user from injuries.
    • Permeable to Airflow - Fan grills barely affect performance — less than 1 % influence on airflow.

     

    Original price was: £0.71.Current price is: £0.69.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC 80mm Fan Grill, Nickel Plated Steel Quick View

    ARCTIC 80mm Fan Grill, Nickel Plated Steel



    Protection for your Fan - Size 80 mm

    • Effective Protection - Protects the fans from external objects and prevents cable damage. The Fan Grill is attached in front of the fan with enclosed screws and protects from hanging cables and the user from injuries.
    • Permeable to Airflow - Fan grills barely affect performance — less than 1 % influence on airflow.

     

    Original price was: £0.87.Current price is: £0.84.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Alpine 17 CO Compact Heatsink & Fan for Continuous Operation, Intel 1851, 1700, Dual Ball Bearing, 100W TDP Quick View

    ARCTIC Alpine 17 CO Compact Heatsink & Fan for Continuous Operation, Intel 1851, 1700, Dual Ball Bearing, 100W TDP

     

    Compact Intel Alder Lake CPU-Cooler for Continuous Operation

     
     
     
    Designed For Intel Alder Lake

    The Alpine 17 is exclusively compatible with Socket LGA1700 and Intel's latest Alder Lake CPUs.
     
     
     
     
     
    Designed For Continuous Operation

    The premium quality of the two ball bearings allows 24/7 continuous operation without compromising performance. Contamination and high temperatures affect this bearing much less than ordinary plain or magnetic bearings. Therefore, the double ball bearing is the perfect choice in working environments where you want to ensure continuous operation with a low failure rate.
     
     
     
     
     
    Easy And Tool-Free Installation

    With the MX-4 already pre-applied, the Alpine 17 can be mounted directly. Thanks to the push pins, installation is a breeze. Additional tools are not needed to mount the cooler.
     
     
     
     
     
    Full Control With Wide RPM Range

    The Alpine 17 features a very wide PWM-controlled speed range. This reduces noise to the minimum while also guaranteeing the highest cooling performance.
     
     
     
     
     
    Improved Cooling Performance Through Innovative Heat Sink Design

    The extra fine cooling fins of the new Alpine are fanned out in a Y-shape. The high thermal conductivity of the aluminium is fully retained in the type of extrusion used. This novel production process makes it possible to produce a high-performance yet very compact radial heat sink. This results in an increase in the surface area of the heat sink, optimization of the airflow and thus an increase in cooling performance.
     
    Original price was: £8.82.Current price is: £8.51.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Alpine 17 Compact Heatsink & Fan, Intel 1851, 1700, Fluid Dynamic Bearing, 95W TDP Quick View

    ARCTIC Alpine 17 Compact Heatsink & Fan, Intel 1851, 1700, Fluid Dynamic Bearing, 95W TDP



    Compact Intel CPU Cooler

     

     

    Designed For Intel Alder Lake

    The Alpine 17 is exclusively compatible with Socket LGA1700 and Intel's latest Alder Lake CPUs.
     
     
     
     
     
    Full Control With Wide Rpm Range

    The Alpine 17 features a very wide PWM-controlled speed range. This reduces noise to the minimum while also guaranteeing the highest cooling performance.
     
     
     
     
     
    Easy And Tool-Free Installation

    With the MX-4 already pre-applied, the Alpine 17 can be mounted directly. Thanks to the push pins, installation is a breeze. Additional tools are not needed to mount the cooler.
     
     
     
     
     
    High-Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction inside the bearing is reduced and higher efficiency is achieved. In this way, less heat develops, there is less bearing noise and the fan life is extended.
     
     
     
     
     
    Improved Cooling Performance Through Innovative Heat Sink Design

    The extra fine cooling fins of the new Alpine are fanned out in a Y-shape. The high thermal conductivity of the aluminium is fully retained in the type of extrusion used. This novel production process makes it possible to produce a high-performance yet very compact radial heat sink. This results in an increase in the surface area of the heat sink, optimization of the airflow and thus an increase in cooling performance.
     
    Original price was: £7.79.Current price is: £7.52.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Alpine 23 CO Compact Heatsink & Fan for Continuous Operation, AMD AM5/AM4, Dual Ball Bearing, 100W TDP Quick View

    ARCTIC Alpine 23 CO Compact Heatsink & Fan for Continuous Operation, AMD AM5/AM4, Dual Ball Bearing, 100W TDP




    Compact AMD CPU Cooler for Continuous Operation

     
    At the end of 2022, AMD released the AM5 socket, the successor to its popular AM4 platform. Because all mechanical dimensions remain identical, we can guarantee the compatibility of ARCTIC coolers with AMD's new processors.




     
    Improved-Cooling-Performance
     
    The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
     
     



    Wide RPM Range

    The Alpine 23 CO features a new motor technology with a very wide, PWM-controlled rpm range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.





    Lower Power Consumption & Minimum Vibration

    The new Alpine 23 CO is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from the commutation of a regular DC motor. These factors contribute to saving energy, lowering the coil temperature, and reducing vibrations to a minimum without compromising performance.
     



     
    For Continuous Operation

    The premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.
     




    Extended Life Span

    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
     
     



    Pre-Applied MX-2 Thermal Paste

    The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
     
     



    Easy and Fast Installation

    Thanks to the mounting clips, the installation is really easy. Alpine 23 CO is simply plugged into the existing AMD retention modules and screwed tight.
     
     



    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the Alpine 23 CO.
     
    Original price was: £8.99.Current price is: £8.68.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Alpine 23 Compact Heatsink & Fan, AMD Sockets, Fluid Dynamic Bearing, 95W TDP Quick View

    ARCTIC Alpine 23 Compact Heatsink & Fan, AMD Sockets, Fluid Dynamic Bearing, 95W TDP


    Compact AMD CPU-Cooler
     

    Improved Cooling Performance By New Production Process

    The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
     
     
     
     
     
    Wide RPM Range

    The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.
     
     
     

     
    Lower Power Consumption & Minimum Vibration

    The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
     



     
     
    High Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     


     
    Extended Life Span

    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
     


     
     
    Pre-Applied MX-2 Thermal Paste

    The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
     



     
    Easy And Tool-Free Installation

    Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight.
     
    Original price was: £7.25.Current price is: £7.00.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC F12 120mm PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 230-1350 RPM Quick View

    ARCTIC F12 120mm PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 230-1350 RPM

     

    4-Pin PWM fan with standard case


    Long Service Life
    The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life
     
     
     
    Perfect Case Fan Regulation with PWM
    The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
     
     
     
    PWM Sharing Technology (PST) Lowers Noise
    If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary
     
     
     
    Innovative Design Enables Quiet and Efficient Ventilation
    The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
     

     

    Original price was: £4.65.Current price is: £4.49.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC F12 Low Noise 120mm Case Fan, Black, 9 Blades, Fluid Dynamic, 1350 RPM Quick View

    ARCTIC F12 Low Noise 120mm Case Fan, Black, 9 Blades, Fluid Dynamic, 1350 RPM


    3-Pin fan with standard case

     
    Long Service Life
    The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life
     

     
    Innovative Design Enables Quiet and Efficient Ventilation
    The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

     
     
    Two Way installation
    • Blow warm air out of the case
    • Draw cool air into your case
     
    Original price was: £2.94.Current price is: £2.84.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC F12 Low Noise 120mm Case Fans (5 Pack), Black, 9 Blades, Fluid Dynamic, 1350 RPM, Value Pack Quick View

    ARCTIC F12 Low Noise 120mm Case Fans (5 Pack), Black, 9 Blades, Fluid Dynamic, 1350 RPM, Value Pack

     

    3-Pin fan with standard case value pack (5 Fans)

     
    Long Service Life
    The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life
     

     
    Innovative Design Enables Quiet and Efficient Ventilation
    The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

     
     
    Two Way installation
    • Blow warm air out of the case
    • Draw cool air into your case
    Original price was: £13.33.Current price is: £12.87.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 36 A-RGB Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST ARGB Fans, Fluid Dynamic Bearing, Black Quick View

    ARCTIC Freezer 36 A-RGB Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST ARGB Fans, Fluid Dynamic Bearing, Black

     

    Multi Compatible Tower CPU Cooler with A-RGB


    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

     
     

    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.

     
     

    Future-Proof Compatibility
    The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.

     
     

    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

     
     

    High-Quality Bearing
    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
     
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     


    P-Fans - High Static Pressure and Impressive Colours
    ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronised with the lighting of other hardware.
     
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £42.35.Current price is: £40.89.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 36 A-RGB Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST ARGB Fans, Fluid Dynamic Bearing, Black, OEM (Bulk Packaging) Quick View

    ARCTIC Freezer 36 A-RGB Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST ARGB Fans, Fluid Dynamic Bearing, Black, OEM (Bulk Packaging)

     

    Multi Compatible Tower CPU Cooler with A-RGB


    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

     
     

    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.

     
     

    Future-Proof Compatibility
    The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.

     
     

    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

     
     

    High-Quality Bearing
    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
     
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     


    P-Fans - High Static Pressure and Impressive Colours
    ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronised with the lighting of other hardware.
     
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £41.17.Current price is: £39.75.
    Add to basket
    Add to wishlist
  • Sale! Placeholder Quick View

    ARCTIC Freezer 36 A-RGB Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST ARGB Fans, Fluid Dynamic Bearing, White

     

    Multi Compatible Tower CPU Cooler with A-RGB


    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

     
     

    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.

     
     

    Future-Proof Compatibility
    The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.

     
     

    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

     
     

    High-Quality Bearing
    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
     
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     


    P-Fans - High Static Pressure and Impressive Colours
    ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronised with the lighting of other hardware.
     
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £44.12.Current price is: £42.60.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 36 CO Heatsink & Fan for Continuous Operation, Intel & AMD, Direct Touch, 2x P12 PWM PST CO Fans, Dual Ball Bearing Quick View

    ARCTIC Freezer 36 CO Heatsink & Fan for Continuous Operation, Intel & AMD, Direct Touch, 2x P12 PWM PST CO Fans, Dual Ball Bearing


     

    Multi Compatible Tower CPU Cooler for Continuous Operation



    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 CO not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.


     
    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.
     
     


    Future-Proof Compatibility
    The Freezer 36 CO is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     


    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 CO is therefore compatible with most 120 mm fans.
     
     


    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     


    Designed for Continuous Operation
    Both fans of the Freezer 36 CO are each equipped with two japanese ball bearings. This makes these fans particularly durable and resistant to external forces such as heat, dust and vibrations. This variant is therefore the ideal choice for 24/7 operation.
     
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     


    P-Fans with High Static Pressure
    ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure.
     
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £34.29.Current price is: £33.11.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 36 Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST Fans, Fluid Dynamic Bearing Quick View

    ARCTIC Freezer 36 Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST Fans, Fluid Dynamic Bearing



    Multi Compatible Tower CPU Cooler


    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.
     
     

    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.
     


    Future-Proof Compatibility
    The Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans.
     


    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     

    High-Quality Bearing
    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     

    P-Fans with High Static Pressure
    ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure.



    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.
     
    Original price was: £32.65.Current price is: £31.53.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 36 Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST Fans, Fluid Dynamic Bearing, Black Quick View

    ARCTIC Freezer 36 Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST Fans, Fluid Dynamic Bearing, Black



    Multi Compatible Tower CPU Cooler


    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.
     
     

    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.
     


    Future-Proof Compatibility
    The Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans.
     


    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     

    High-Quality Bearing
    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     

    P-Fans with High Static Pressure
    ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure.



    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.
     
    Original price was: £34.61.Current price is: £33.42.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 36 Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST Fans, Fluid Dynamic Bearing, Black, OEM (Bulk Packaging) Quick View

    ARCTIC Freezer 36 Heatsink & Fan, Intel & AMD, Direct Touch, 2x P12 PWM PST Fans, Fluid Dynamic Bearing, Black, OEM (Bulk Packaging)



    Multi Compatible Tower CPU Cooler


    High-Class Finish with Aluminium Top Plate
    With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.
     
     

    Performance-Optimised Successor
    Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in our HK lab; all coolers ran at full speed.
     


    Future-Proof Compatibility
    The Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Improved Fan Mounting
    Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans.
     


    LGA1851 | LGA1700 Contact Frame
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     

    High-Quality Bearing
    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
     


    Optimised Heatsink
    The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
     
     

    P-Fans with High Static Pressure
    ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure.



    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.
     
    Original price was: £33.74.Current price is: £32.58.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 4U-M Rev 2 Multicompatible 4U Single Tower CPU Cooler, Intel/AMD Server CPUs, Continuous Operation, Dual Socket Compatibility, 350W TDP Quick View

    ARCTIC Freezer 4U-M Rev 2 Multicompatible 4U Single Tower CPU Cooler, Intel/AMD Server CPUs, Continuous Operation, Dual Socket Compatibility, 350W TDP




    Versatile Multi-Compatible Server Cooler

    The Freezer 4U-M Rev. 2 stands as a multi-compatible server cooler, boasting an expansive contact surface and an enhanced mounting mechanism. It now offers compatibility with a wide range of Intel and AMD server processors, including Intel's LGA 4710, LGA 4189 and LGA 4677, as well as AMD's SP6, sTR5, SP3, TR4, sTRX4, and sWRX8 sockets. It also supports the Ampere Altra LGA4926*. Remarkably, despite its impressive cooling capabilities, the Freezer 4U-M Rev. 2 consumes a mere 2.88 watts, ensuring exceptional efficiency in cooling even the most powerful processors with up to 64 cores and a TDP of up to 350 watts.
     
    *Freezer 4U-M Ampere Mounting Kit is required.





     
    RAM Compatibility and Clearance

    The Freezer 4U-M Rev. 2 offers a generous 53 mm of clearance for memory, allowing the use of RAM modules with moderate heatsinks. This space facilitates efficient airflow and ensures compatibility with various types of RAM.





     
    Compact Design and Dual Socket Compatibility

    With an optimised installation height of only 145 mm, it fits into both classic 4U server racks and most consumer 4U cases available on the market. The Freezer 4U-M Rev. 2 features a compact design with dimensions of just 156 x 124 mm. This also makes it suitable for dual-socket motherboards. To adjust the airflow direction if required, the fans can be easily swapped over.






    Powerful Fans in Push-Pull Configuration

    The installed PWM fans benefit from all the advantages of the award-winning P series. Designed for static pressure, the fans are ideal for the Freezer 4U-M Rev. 2's high fin density and provide efficient heat dissipation in push-pull mode, even in power-hungry applications. Especially office workstations benefit from the quiet fans. The dual configuration also allows for inherent redundancy and protects the system from total shutdown caused by heat.






    Designed for continuous operation

    Both fans of the Freezer 4U-M Rev. 2 are equipped with dual ball bearings, which allows for 24/7 continuous operation without the slightest compromise in performance. This type of bearing is much more resistant to contamination and wear caused by high temperatures than conventional sleeve bearings or Fluid-Dynamic bearings and is therefore the perfect choice if you want to ensure fault-free continuous operation.






    Premium Thermal Paste Included

    The Freezer 4U-M Rev. 2 comes with MX-6 thermal paste. ARCTIC's Ultimate Performance thermal paste reduces the heat build-up between the heat spreader of the CPU and the cooler. The thermal paste is neither conductive nor capacitive and therefore absolutely safe to use.

     

    Original price was: £50.79.Current price is: £49.04.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 8A CO Compact AMD Heatsink & Fan for Continuous Operation, AMD AM5/AM4, Dual Ball Bearing, Direct Touch Technology Quick View

    ARCTIC Freezer 8A CO Compact AMD Heatsink & Fan for Continuous Operation, AMD AM5/AM4, Dual Ball Bearing, Direct Touch Technology



    Freezer 8A CO - Compact AMD CPU Cooler for Continuous Operation

    • Compact Design - Thanks to its low height, the Freezer 8A CO is ideal for compact cases and offers maximum compatibility with high RAM modules and nearby components.
    • For AMD Sockets AM5 and AM4 - The scope of delivery only includes mounting material for AMD systems - this reduces packaging waste and saves unnecessary material.
    • Efficient Cooling with Offset Heatpipes - The offset arrangement ensures optimal heat transfer from the base to the fins – for even heat distribution and improved cooling performance.
    • Dual Ball Bearing - For a longer service life and increased reliability - these fans are particularly resistant to heat and dust.
    • Pre-Applied MX-6 - The Freezer 8A CO is supplied with ARCTIC high-performance thermal paste so that the cooler can be installed and put into operation immediately.
    • Optional Offset Mounting for AMD - Allows offset mounting of the heatsink towards the CPU hotspot, optimizing alignment for asymmetric multi-die CPUs and ensuring more efficient heat transfer.
    • 6 Years Warranty - We are convinced of the quality and durability of our products - we are happy to pass this warranty on to our customers.
     

     

    Original price was: £17.15.Current price is: £16.56.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 8A Compact AMD Heatsink & Fan, AMD AM5/AM4, Fluid Dynamic Bearing, Direct Touch Technology Quick View

    ARCTIC Freezer 8A Compact AMD Heatsink & Fan, AMD AM5/AM4, Fluid Dynamic Bearing, Direct Touch Technology



    Freezer 8A - Compact AMD CPU Cooler

    • Compact Design - Thanks to its low height, the Freezer 8A is ideal for compact cases and offers maximum compatibility with high RAM modules and nearby components.
    • For AMD Sockets AM5 and AM4 - The scope of delivery only includes mounting material for AMD systems - this reduces packaging waste and saves unnecessary material.
    • Efficient Cooling with Offset Heatpipes - The offset arrangement ensures optimal heat transfer from the base to the fins – for even heat distribution and improved cooling performance.
    • Fluid Dynamic Bearing - The low-friction sleeve bearing ensures particularly quiet operation - the fan runs pleasantly quietly both at low speeds and under varying loads.
    • Pre-Applied MX-6 - The Freezer 8A is supplied with ARCTIC high-performance thermal paste so that the cooler can be installed and put into operation immediately.
    • Optional Offset Mounting for AMD - Allows offset mounting of the heatsink towards the CPU hotspot, optimizing alignment for asymmetric multi-die CPUs and ensuring more efficient heat transfer.
    • 6 Years Warranty - We are convinced of the quality and durability of our products - we are happy to pass this warranty on to our customers.
     

     

    Original price was: £15.47.Current price is: £14.94.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 8i CO Compact Intel Heatsink & Fan for Continuous Operation, Intel 1851/1700, Dual Ball Bearing, Direct Touch Technology Quick View

    ARCTIC Freezer 8i CO Compact Intel Heatsink & Fan for Continuous Operation, Intel 1851/1700, Dual Ball Bearing, Direct Touch Technology



    Freezer 8i CO - Compact Intel CPU Cooler for Continuous Operation

    • Compact Design - Thanks to its low height, the Freezer 8i CO is ideal for compact cases and offers maximum compatibility with high RAM modules and nearby components.
    • For Intel Sockets LGA1851 and LGA1700 - The scope of delivery only includes mounting material for Intel systems - this reduces packaging waste and saves unnecessary material.
    • Efficient Cooling with Offset Heatpipes - The offset arrangement ensures optimal heat transfer from the base to the fins – for even heat distribution and improved cooling performance.
    • Dual Ball Bearing - For a longer service life and increased reliability - these fans are particularly resistant to heat and dust.
    • Pre-Applied MX-6 - The Freezer 8i CO is supplied with ARCTIC high-performance thermal paste so that the cooler can be installed and put into operation immediately.
    • Intel Contact Frame - Optimized contact pressure distribution for a longer CPU service life and more efficient heat transfer.
    • 6 Years Warranty - We are convinced of the quality and durability of our products - we are happy to pass this warranty on to our customers.
     

     

    Original price was: £18.15.Current price is: £17.53.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Freezer 8i Compact Intel Heatsink & Fan, Intel 1851/1700, Fluid Dynamic Bearing, Direct Touch Technology Quick View

    ARCTIC Freezer 8i Compact Intel Heatsink & Fan, Intel 1851/1700, Fluid Dynamic Bearing, Direct Touch Technology



    Freezer 8i - Compact Intel CPU Cooler

    • Compact Design - Thanks to its low height, the Freezer 8i is ideal for compact cases and offers maximum compatibility with high RAM modules and nearby components.
    • For Intel Sockets LGA1851 and LGA1700 - The scope of delivery only includes mounting material for Intel systems - this reduces packaging waste and saves unnecessary material.
    • Efficient Cooling with Offset Heatpipes - The offset arrangement ensures optimal heat transfer from the base to the fins – for even heat distribution and improved cooling performance.
    • Fluid Dynamic Bearing - The low-friction sleeve bearing ensures particularly quiet operation - the fan runs pleasantly quietly both at low speeds and under varying loads.
    • Pre-Applied MX-6 - The Freezer 8i is supplied with ARCTIC high-performance thermal paste so that the cooler can be installed and put into operation immediately.
    • Intel Contact Frame - Optimized contact pressure distribution for a longer CPU service life and more efficient heat transfer.
    • 6 Years Warranty - We are convinced of the quality and durability of our products - we are happy to pass this warranty on to our customers.
     

     

    Original price was: £16.30.Current price is: £15.74.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III A-RGB 240mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White Quick View

    ARCTIC Liquid Freezer III A-RGB 240mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White



    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box - Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     



    Future-Proof Compatibility

    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     



    Silent and Powerful VRM Fan

    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     



    Contact Frame for Intel LGA1700 and LGA1851

    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     



     
    Optimised, In-House Developed Water Pump

    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     



     
    Complete Control or Simple Control

    Two connection cables - two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     


    Native AMD Offset Mounting

    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     



    Improved Radiator Design

    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     



    High Static Pressure

    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     



    Limited Compatibility with Few Motherboards

    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     


    Addressable LEDs for all Requirements

    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     


    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £79.45.Current price is: £76.71.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black



    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box - Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     



    Future-Proof Compatibility

    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     



    Silent and Powerful VRM Fan

    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     



    Contact Frame for Intel LGA1700 and LGA1851

    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     



     
    Optimised, In-House Developed Water Pump

    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     



     
    Complete Control or Simple Control

    Two connection cables - two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     


    Native AMD Offset Mounting

    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     



    Improved Radiator Design

    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     



    High Static Pressure

    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     



    Limited Compatibility with Few Motherboards

    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     


    Addressable LEDs for all Requirements

    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     


    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £87.45.Current price is: £84.43.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White Quick View

    ARCTIC Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White



    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box - Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     



    Future-Proof Compatibility

    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     



    Silent and Powerful VRM Fan

    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     



    Contact Frame for Intel LGA1700 and LGA1851

    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     



     
    Optimised, In-House Developed Water Pump

    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     



     
    Complete Control or Simple Control

    Two connection cables - two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     


    Native AMD Offset Mounting

    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     



    Improved Radiator Design

    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     



    High Static Pressure

    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     



    Limited Compatibility with Few Motherboards

    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     


    Addressable LEDs for all Requirements

    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     


    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £89.10.Current price is: £86.03.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro 240mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro 240mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black



     

    Liquid Freezer III Pro 240 - Multi Compatible All-in-One CPU Water Cooler

    • TIM: MX-6 (0.8 g)
    • Warranty: 6 Years
    • Operating Ambient Temperature: 0—40 °C
    • Pump/: 800–2800 rpm (PWM controlled)
    • Current | Voltage: 0.35 A | 12 V DC
    • Cold Plate: Copper, Micro Skived Fins
    • Tube Length: 450 mm
    • Tube Diameter Outer: 12.4 mm
    • Tube Diameter Inner: 6.0 mm
    • Weight: 1675 g
     
     
     
     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.



     
     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.



     
     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     
     

     
     
    The New P12 Pro Fans

    More Performance at Any Speed
    The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.
     
    Speed: 600—3000 rpm
    Bearing: Fluid Dynamic Bearing
    Static Pressure: 6.9 mmH2O
    Airflow: 77 cfm 
     
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     
     
     

     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.
     



     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     

     

    Original price was: £79.50.Current price is: £76.76.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro 280mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro 280mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black



     

    Liquid Freezer III Pro 280 - Multi Compatible All-in-One CPU Water Cooler

    • TIM: MX-6 (0.8 g)
    • Warranty: 6 Years
    • Operating Ambient Temperature: 0—40 °C
    • Pump/: 800–2800 rpm (PWM controlled)
    • Current | Voltage: 0.35 A | 12 V DC
    • Cold Plate: Copper, Micro Skived Fins
    • Tube Length: 450 mm
    • Tube Diameter Outer: 12.4 mm
    • Tube Diameter Inner: 6.0 mm
    • Weight: 1905 g
     
     
     
     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.



     
     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.



     
     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     
     

     
     
    The New P14 Pro Fans

    The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.
     
    Speed: 400—2500 rpm
    Bearing: Fluid Dynamic Bearing
    Static Pressure: 5.2 mmH2O
    Airflow: 110 cfm 
     
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     
     
     

     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.
     



     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     

     

    Original price was: £86.99.Current price is: £83.99.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro 360mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro 360mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black



     

    Liquid Freezer III Pro 360 - Multi Compatible All-in-One CPU Water Cooler

    • TIM: MX-6 (0.8 g)
    • Warranty: 6 Years
    • Operating Ambient Temperature: 0—40 °C
    • Pump/: 800–2800 rpm (PWM controlled)
    • Current | Voltage: 0.35 A | 12 V DC
    • Cold Plate: Copper, Micro Skived Fins
    • Tube Length: 450 mm
    • Tube Diameter Outer: 12.4 mm
    • Tube Diameter Inner: 6.0 mm
    • Weight: 2020 g
     
     
     
     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.



     
     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.



     
     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     
     

     
     
    The New P12 Pro Fans

    More Performance at Any Speed
    The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.
     
    Speed: 600—3000 rpm
    Bearing: Fluid Dynamic Bearing
    Static Pressure: 6.9 mmH2O
    Airflow: 77 cfm 
     
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     
     
     

     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.
     



     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     

     

    Original price was: £92.67.Current price is: £89.47.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro 420mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro 420mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black



     

    Liquid Freezer III Pro 420 - Multi Compatible All-in-One CPU Water Cooler

    • TIM: MX-6 (0.8 g)
    • Warranty: 6 Years
    • Operating Ambient Temperature: 0—40 °C
    • Pump/: 800–2800 rpm (PWM controlled)
    • Current | Voltage: 0.35 A | 12 V DC
    • Cold Plate: Copper, Micro Skived Fins
    • Tube Length: 450 mm
    • Tube Diameter Outer: 12.4 mm
    • Tube Diameter Inner: 6.0 mm
    • Weight: 2370 g
     
     
     
     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.



     
     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.



     
     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     
     

     
     
    The New P14 Pro Fans

    More Performance at Any Speed
    The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.
     
    Speed: 400-2500 rpm
    Bearing: Fluid Dynamic Bearing
    Static Pressure: 5.2 mmH2O
    Airflow: 110 cfm 
     
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     
     
     

     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.
     



     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     

     

    Original price was: £104.53.Current price is: £100.93.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 240mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 240mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black



    Liquid Freezer III Pro 240 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 450 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 2005 g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P12 Pro Fans

    More Performance at Any Speed
    The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load - for maximum cooling without compromise.
    • Speed: 600 - 3000 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 6.9 mmH2O
    • Airflow: 77 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards

    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, Arctic provide a compatible M.2 cooler free of charge.
     

     

    Original price was: £88.70.Current price is: £85.64.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 240mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, White Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 240mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, White



    Liquid Freezer III Pro 240 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 450 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 2005 g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P12 Pro Fans

    More Performance at Any Speed
    The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load - for maximum cooling without compromise.
    • Speed: 600 - 3000 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 6.9 mmH2O
    • Airflow: 77 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards

    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, Arctic provide a compatible M.2 cooler free of charge.
     

     

    Original price was: £91.28.Current price is: £88.13.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 280mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 280mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black



    Liquid Freezer III Pro 280 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 450 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 1897g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P12 Pro Fans
     

    The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load - for maximum cooling without compromise.
    • Speed: 4500 - 2500 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 5.2 mmH2O
    • Airflow: 110 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards

    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, we provide a compatible M.2 cooler free of charge.
     

     

    Original price was: £99.19.Current price is: £95.77.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 280mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, White Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 280mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, White



    Liquid Freezer III Pro 280 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 450 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 1897g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P12 Pro Fans
     

    The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load - for maximum cooling without compromise.
    • Speed: 4500 - 2500 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 5.2 mmH2O
    • Airflow: 110 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards

    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, we provide a compatible M.2 cooler free of charge.
     

     

    Original price was: £104.44.Current price is: £100.84.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 360mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 360mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, Black



    Liquid Freezer III Pro 360 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 450 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 2005 g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P12 Pro Fans

    More Performance at Any Speed
    The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load - for maximum cooling without compromise.
    • Speed: 600 - 3000 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 6.9 mmH2O
    • Airflow: 77 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards

    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, Arctic provide a compatible M.2 cooler free of charge.
     

     

    Original price was: £112.10.Current price is: £108.23.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 360mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, White Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 360mm Liquid CPU Cooler, P12 Pro PWM Fans & PWM Controlled Pump, White



    Liquid Freezer III Pro 360 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 450 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 2005 g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P12 Pro Fans

    More Performance at Any Speed
    The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load - for maximum cooling without compromise.
    • Speed: 600 - 3000 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 6.9 mmH2O
    • Airflow: 77 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards

    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, Arctic provide a compatible M.2 cooler free of charge.
     

     

    Original price was: £116.19.Current price is: £112.18.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 420mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 420mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, Black



    Liquid Freezer III Pro 420 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 500 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 2358 g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P14 Pro Fans

    More Performance at Any Speed
    The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.
    • Speed: 400 - 2500 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 5.2 mmH2O
    • Airflow: 110 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards
    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, we provide a compatible M.2 cooler free of charge.

     

    Original price was: £117.80.Current price is: £113.74.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Liquid Freezer III Pro A-RGB 420mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, White Quick View

    ARCTIC Liquid Freezer III Pro A-RGB 420mm Liquid CPU Cooler, P14 Pro PWM Fans & PWM Controlled Pump, White



    Liquid Freezer III Pro 420 A-RGB - Multi Compatible All-in-One CPU Water Cooler with A-RGB

    • TIM MX-6 (0.8 g)
    • Warranty 6 Years
    • Operating Ambient Temperature 0 - 40 °C
    • Pump 800–2800 RPM (PWM controlled)
    • Current | Voltage 0.35 A | 12 V DC
    • Cold Plate Copper, Micro Skived Fins
    • Tube Length 500 mm
    • Tube Diameter Outer: 12.4 mm / Inner: 6.0 mm
    • Weight 2358 g
     
     
     

     
    Integrated VRM Fan

    PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance.
     



     
    Offset Mounting for Intel and AMD

    Shifts the cold plate to the CPU hotspot for more efficient heat transfer.
     



     
    Intel Contact Frame

    Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.
     
     


     
    Integrated Cable Management

    Fan cables integrated into the sleeving simplify installation and minimize cable clutter.
     



     
    The New P14 Pro Fans

    More Performance at Any Speed
    The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise.
    • Speed: 400 - 2500 RPM
    • Fluid Dynamic Bearing
    • Static Pressure: 5.2 mmH2O
    • Airflow: 110 cfm
     
     
     
     
    Premium-Class Radiator

    The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.
     


     
     
    Premium Tubing

    Reinforced EPDM tubing with braided sheathing for increased durability.
     



     
    Easy Installation

    Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual.



     
     
    Includes MX-6 Thermal Paste

    Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly.
     


     
     
    Two Control Options

    With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.
     



     
    Check Your Case for Compatibility

    Please note that the Liquid Freezer requires at least 63 mm of clearance for installation
     



     
    Limited Compatibility with Certain Motherboards
    Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, we provide a compatible M.2 cooler free of charge.

     

    Original price was: £125.51.Current price is: £121.18.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC M2 Pro (Black) M.2 SSD Heatsink, For Single & Double Sided M.2 2280 Modules, Thermal Pads Included Quick View

    ARCTIC M2 Pro (Black) M.2 SSD Heatsink, For Single & Double Sided M.2 2280 Modules, Thermal Pads Included



    SSD Cooler for M.2 Drives
     

    Efficient Heat Dissipation
    Thanks to its additional mass, the ARCTIC M2 Pro effectively dissipates heat from the chips and passes it on to the environment, resulting in cooler SSD and faster cooling off.

     

    Reliable Performance
    The M2 Pro enables M.2 SSDs to work efficiently and achieve high performance even during demanding read and write operations. Even during intensive use, temporary temperature peaks are mitigated, allowing the SSDs to maintain their maximum performance and reducing the risk of thermal throttling.


     
    PS5 Compatible M.2 SSD Cooling
    It’s possible to expand the storage capacity of the PlayStation 5 by retrofitting a fast M.2 SSD. Sony expressly emphasizes in the instructions that this M.2 storage medium requires a heat sink. The ARCTIC M2 Pro meets the specified requirements and is therefore suitable for installation in the PS5 and PS5 Slim.


     
    TP-3 Thermal Pads Included
    The M2 Pro uses two precisely cut ARCTIC TP-3 thermal pads. Due to their softness, they are particularly suitable as thermal pads for M.2 SSDs, as they adapt optimally to the height differences of the controller, RAM and NAND. In addition, the TP-3 offers excellent thermal conductivity, is easy to handle and safe to use.


     
    Easy Assembly for Single- and Double-sided SSDs
    The mounting of the ARCTIC M2 Pro does not require screws or rubber bands. Instead, the SSD is placed between the heat sinks using a click process. The NVMe SSD cooler is designed for both single-sided and double-sided 2280 M.2 SSDs. The height differences are compensated for by the included thermal pad.
    Original price was: £3.23.Current price is: £3.12.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC M2 Pro (Silver) M.2 SSD Heatsink, For Single & Double Sided M.2 2280 Modules, Thermal Pads Included Quick View

    ARCTIC M2 Pro (Silver) M.2 SSD Heatsink, For Single & Double Sided M.2 2280 Modules, Thermal Pads Included



    SSD Cooler for M.2 Drives
     

    Efficient Heat Dissipation
    Thanks to its additional mass, the ARCTIC M2 Pro effectively dissipates heat from the chips and passes it on to the environment, resulting in cooler SSD and faster cooling off.
     


    Reliable Performance
    The M2 Pro enables M.2 SSDs to work efficiently and achieve high performance even during demanding read and write operations. Even during intensive use, temporary temperature peaks are mitigated, allowing the SSDs to maintain their maximum performance and reducing the risk of thermal throttling.


     
    PS5 Compatible M.2 SSD Cooling
    It’s possible to expand the storage capacity of the PlayStation 5 by retrofitting a fast M.2 SSD. Sony expressly emphasizes in the instructions that this M.2 storage medium requires a heat sink. The ARCTIC M2 Pro meets the specified requirements and is therefore suitable for installation in the PS5 and PS5 Slim.


     
    TP-3 Thermal Pads Included
    The M2 Pro uses two precisely cut ARCTIC TP-3 thermal pads. Due to their softness, they are particularly suitable as thermal pads for M.2 SSDs, as they adapt optimally to the height differences of the controller, RAM and NAND. In addition, the TP-3 offers excellent thermal conductivity, is easy to handle and safe to use.


     
    Easy Assembly for Single- and Double-sided SSDs
    The mounting of the ARCTIC M2 Pro does not require screws or rubber bands. Instead, the SSD is placed between the heat sinks using a click process. The NVMe SSD cooler is designed for both single-sided and double-sided 2280 M.2 SSDs. The height differences are compensated for by the included thermal pad.
    Original price was: £3.26.Current price is: £3.15.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX Cleaner Wipes for Removing Thermal Compounds, Limonene-Based, 40 Individually Packaged Wipes Quick View

    ARCTIC MX Cleaner Wipes for Removing Thermal Compounds, Limonene-Based, 40 Individually Packaged Wipes


    Wipes for removing Thermal Compounds (40 Pieces)
     

    Perfect Cleaning
    The MX Cleaner dissolves old and heavily dried thermal paste, such as your MX-2 or MX-4, so that it can be picked up and removed with the cloth without any problems.


     
    Residue-Free Removal
    In contrast to cleaning with handkerchiefs, household rolls or cloth wipes, the thermal paste does not smear on the processor, but is cleanly loosened from the surface and removed. Even stubborn traces and residues of heat conductive pads can be reliably removed.


     
    Gentle Active Ingredients
    ARCTIC's MX Cleaner is limonene-based and contains neither alcohols nor benzenes. This natural substance is primarily used for industrial cleaning as it is effective and at the same time gentle to metals and alloys.


     
    Individually Packed
    The 40 MX-Cleaner cleaning cloths included in the set are individually-packed and airtight. This keeps them moist for a long time, making them suitable for both hobby users and enthusiasts.
     
    Original price was: £5.79.Current price is: £5.59.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-4 Thermal Compound w/ Spatula, 4g Syringe, 8.5W/mK Quick View

    ARCTIC MX-4 Thermal Compound w/ Spatula, 4g Syringe, 8.5W/mK

     

    Thermal Compound for All Coolers
     
    Better than Liquid Metal
    The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently. Superb in performance, MX-4 is the best companion for overclockers and enthusiasts.
     
     
    Easy to Apply
    With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.
     
     
    Safe Application
    It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.
     
     
    High Durability
    In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years.
     
     
    Value for Money
    A high performance thermal compound perfect for system builders, there's no suprise that the MX-4 exceeds your expectations for its low price tag.
    Original price was: £4.26.Current price is: £4.12.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-4 Thermal Compound w/ Spatula, 8g Syringe, 8.5W/mK Quick View

    ARCTIC MX-4 Thermal Compound w/ Spatula, 8g Syringe, 8.5W/mK




    Premium Performance Thermal Paste with Spatula

     
    Highest Thermal Conductivity

    The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, guaranteeing that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission.  MX-4 proves without a doubt that great performance does not necessarily require a high price.




     
    Easy Application

    Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video below demonstrates the application technique to avoid air pockets between processors and coolers.




     
    Secure Usage

    In contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.




     
    Proven Quality

    While the packaging of our thermal paste has changed several times over the years, the composition of the formula has remained the same. Our MX pastes have long stood for high performance and quality, and with our new, recyclable packaging, we aim to reduce CO2 emissions and thus make a contribution to the environment.
     
    Original price was: £5.97.Current price is: £5.77.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-4 Thermal Compound, 20g Syringe, 8.5W/mK Quick View

    ARCTIC MX-4 Thermal Compound, 20g Syringe, 8.5W/mK

     

    Thermal Compound for All Coolers

     
    Better than Liquid Metal
    The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently. Superb in performance, MX-4 is the best companion for overclockers and enthusiasts.
     
     
    Easy to Apply
    With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.
     
     
    Safe Application
    It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.
     
     
    High Durability
    In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years.
     
     
    Value for Money
    A high performance thermal compound perfect for system builders, there's no suprise that the MX-4 exceeds your expectations for its low price tag.

     

    Original price was: £11.02.Current price is: £10.64.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-4 Thermal Compound, 45g Syringe, 8.5W/mK Quick View

    ARCTIC MX-4 Thermal Compound, 45g Syringe, 8.5W/mK




    Premium Performance Thermal Paste 

     
    Highest Thermal Conductivity

    The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, guaranteeing that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission.  MX-4 proves without a doubt that great performance does not necessarily require a high price.




     
    Easy Application

    Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video below demonstrates the application technique to avoid air pockets between processors and coolers.




     
    Secure Usage

    In contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.




     
    Proven Quality

    While the packaging of our thermal paste has changed several times over the years, the composition of the formula has remained the same. Our MX pastes have long stood for high performance and quality, and with our new, recyclable packaging, we aim to reduce CO2 emissions and thus make a contribution to the environment.
     
    Original price was: £21.20.Current price is: £20.47.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-4 Thermal Compound, 4g Syringe, 8.5W/mK Quick View

    ARCTIC MX-4 Thermal Compound, 4g Syringe, 8.5W/mK

     
    Thermal Compound for All Coolers
     
    Better than Liquid Metal
    The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently. Superb in performance, MX-4 is the best companion for overclockers and enthusiasts.
     
     
    Easy to Apply
    With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.
     
     
    Safe Application
    It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.
     
     
    High Durability
    In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years.
     
     
    Value for Money
    A high performance thermal compound perfect for system builders, there's no suprise that the MX-4 exceeds your expectations for its low price tag.
    Original price was: £4.06.Current price is: £3.92.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-4 Thermal Compound, 8g Syringe, 8.5W/mK Quick View

    ARCTIC MX-4 Thermal Compound, 8g Syringe, 8.5W/mK

     

    Thermal Compound for All Coolers

     
    Better than Liquid Metal
    The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently. Superb in performance, MX-4 is the best companion for overclockers and enthusiasts.
     
     
    Easy to Apply
    With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.
     
     
    Safe Application
    It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.
     
     
    High Durability
    In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years.
     
     
    Value for Money
    A high performance thermal compound perfect for system builders, there's no suprise that the MX-4 exceeds your expectations for its low price tag.
    Original price was: £5.76.Current price is: £5.56.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-6 Thermal Compound 4g Syringe & 6x MX Cleaner Wipes Quick View

    ARCTIC MX-6 Thermal Compound 4g Syringe & 6x MX Cleaner Wipes




    Ultimate Performance Thermal Paste
     

    ARCTIC presents MX-6, its newly developed UltimatePerformance Thermal Paste. It has been developed as a successor to the tried-and-tested MX-4, one of the world's best-selling thermal pastes. Behind MX-6, stand over 20 years of expertise in the PC-cooling market, enabling ARCTIC to offer this high-performance product at a fair price.

    MX-6 is easy to apply thanks to its high viscosity and thus thicker consistency. In contrast to thermal pastes based on metal oxide or liquid metal, it is not electrically conductive and not capacitive. This eliminates the risk of short circuits and discharges and eliminates corrosion damage to the radiator floor, which often occurs when liquid metal is used.

    The new MX-6 features low thermal resistance, and is easy to apply and safe to use, ensuring reliable heat dissipation over long periods of time. It is suitable for all CPUs and GPUs in PCs, laptops or consoles, as well as ICs.

     

    Proven Quality
    We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-4, one of the best-selling thermal pastes in the world. The focus was on versatile application possibilities and an easy-to-use consistency.
     
     
    Simply The Paste
    The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.
     
     
    Risk-Free Application
    MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.
     
     
    Versatile Range Of Applications
    With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect. It's also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.
     
     
    Often Copied But Never Achieved
    ARCTIC's thermal pastes have always been one of the most popular products on the TIM market. To be able to ensure that a paste has been produced and filled under ARCTIC regulations and thus meets our high quality standards, we have the ARCTIC Authenticity Check. This means that every product can be reliably verified so that our customers are always on the safe side.
     
     
    Easy Application
    Thanks to its consistency, MX-6 is easy to apply even for beginners. In the video, we show how it can be applied to avoid air pockets between the processor and the cooler

     

     

     

    MX Cleaner Wipes for removing Thermal Compounds
     

    Perfect Cleaning
    The MX Cleaner dissolves old and heavily dried thermal paste so that it can be picked up and removed with the cloth without any problems.

     
    Residue-Free Removal
    In contrast to cleaning with handkerchiefs, household rolls or cloth wipes, the thermal paste does not smear on the processor, but is cleanly loosened from the surface and removed. Even stubborn traces and residues of heat conductive pads can be reliably removed.

     
    Gentle Active Ingredients
    ARCTIC's MX Cleaner is limonene-based and contains neither alcohols nor benzenes. This natural substance is primarily used for industrial cleaning as it is effective and at the same time gentle to metals and alloys.
    Original price was: £6.38.Current price is: £6.16.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-6 Thermal Compound, 2g Syringe, High Performance Quick View

    ARCTIC MX-6 Thermal Compound, 2g Syringe, High Performance




    Ultimate Performance Thermal Paste
     

    ARCTIC presents MX-6, its newly developed UltimatePerformance Thermal Paste. It has been developed as a successor to the tried-and-tested MX-4, one of the world's best-selling thermal pastes. Behind MX-6, stand over 20 years of expertise in the PC-cooling market, enabling ARCTIC to offer this high-performance product at a fair price.

    MX-6 is easy to apply thanks to its high viscosity and thus thicker consistency. In contrast to thermal pastes based on metal oxide or liquid metal, it is not electrically conductive and not capacitive. This eliminates the risk of short circuits and discharges and eliminates corrosion damage to the radiator floor, which often occurs when liquid metal is used.

    The new MX-6 features low thermal resistance, and is easy to apply and safe to use, ensuring reliable heat dissipation over long periods of time. It is suitable for all CPUs and GPUs in PCs, laptops or consoles, as well as ICs.


     

    Proven Quality
    We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-4, one of the best-selling thermal pastes in the world. The focus was on versatile application possibilities and an easy-to-use consistency.
     
     
     
    Simply The Paste
    The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.
     
     
     
    Risk-Free Application
    MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.
     
     
     
    Versatile Range Of Applications
    With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect. It's also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.
     
     
     
    Often Copied But Never Achieved
    ARCTIC's thermal pastes have always been one of the most popular products on the TIM market. To be able to ensure that a paste has been produced and filled under ARCTIC regulations and thus meets our high quality standards, we have the ARCTIC Authenticity Check. This means that every product can be reliably verified so that our customers are always on the safe side.
     

     
    Easy Application
    Thanks to its consistency, MX-6 is easy to apply even for beginners. In the video, we show how it can be applied to avoid air pockets between the processor and the cooler
     
    Original price was: £3.86.Current price is: £3.72.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-6 Thermal Compound, 4g Syringe, High Performance Quick View

    ARCTIC MX-6 Thermal Compound, 4g Syringe, High Performance




    Ultimate Performance Thermal Paste
     

    ARCTIC presents MX-6, its newly developed UltimatePerformance Thermal Paste. It has been developed as a successor to the tried-and-tested MX-4, one of the world's best-selling thermal pastes. Behind MX-6, stand over 20 years of expertise in the PC-cooling market, enabling ARCTIC to offer this high-performance product at a fair price.

    MX-6 is easy to apply thanks to its high viscosity and thus thicker consistency. In contrast to thermal pastes based on metal oxide or liquid metal, it is not electrically conductive and not capacitive. This eliminates the risk of short circuits and discharges and eliminates corrosion damage to the radiator floor, which often occurs when liquid metal is used.

    The new MX-6 features low thermal resistance, and is easy to apply and safe to use, ensuring reliable heat dissipation over long periods of time. It is suitable for all CPUs and GPUs in PCs, laptops or consoles, as well as ICs.


     

    Proven Quality
    We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-4, one of the best-selling thermal pastes in the world. The focus was on versatile application possibilities and an easy-to-use consistency.
     
     
     
    Simply The Paste
    The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.
     
     
     
    Risk-Free Application
    MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.
     
     
     
    Versatile Range Of Applications
    With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect. It's also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.
     
     
     
    Often Copied But Never Achieved
    ARCTIC's thermal pastes have always been one of the most popular products on the TIM market. To be able to ensure that a paste has been produced and filled under ARCTIC regulations and thus meets our high quality standards, we have the ARCTIC Authenticity Check. This means that every product can be reliably verified so that our customers are always on the safe side.
     

     
    Easy Application
    Thanks to its consistency, MX-6 is easy to apply even for beginners. In the video, we show how it can be applied to avoid air pockets between the processor and the cooler
     

     

    Original price was: £4.68.Current price is: £4.52.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC MX-6 Thermal Compound, 8g Syringe, High Performance Quick View

    ARCTIC MX-6 Thermal Compound, 8g Syringe, High Performance




    Ultimate Performance Thermal Paste
     

    ARCTIC presents MX-6, its newly developed UltimatePerformance Thermal Paste. It has been developed as a successor to the tried-and-tested MX-4, one of the world's best-selling thermal pastes. Behind MX-6, stand over 20 years of expertise in the PC-cooling market, enabling ARCTIC to offer this high-performance product at a fair price.

    MX-6 is easy to apply thanks to its high viscosity and thus thicker consistency. In contrast to thermal pastes based on metal oxide or liquid metal, it is not electrically conductive and not capacitive. This eliminates the risk of short circuits and discharges and eliminates corrosion damage to the radiator floor, which often occurs when liquid metal is used.

    The new MX-6 features low thermal resistance, and is easy to apply and safe to use, ensuring reliable heat dissipation over long periods of time. It is suitable for all CPUs and GPUs in PCs, laptops or consoles, as well as ICs.


     

    Proven Quality
    We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-4, one of the best-selling thermal pastes in the world. The focus was on versatile application possibilities and an easy-to-use consistency.
     
     
     
    Simply The Paste
    The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.
     
     
     
    Risk-Free Application
    MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.
     
     
     
    Versatile Range Of Applications
    With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect. It's also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.
     
     
     
    Often Copied But Never Achieved
    ARCTIC's thermal pastes have always been one of the most popular products on the TIM market. To be able to ensure that a paste has been produced and filled under ARCTIC regulations and thus meets our high quality standards, we have the ARCTIC Authenticity Check. This means that every product can be reliably verified so that our customers are always on the safe side.
     

     
    Easy Application
    Thanks to its consistency, MX-6 is easy to apply even for beginners. In the video, we show how it can be applied to avoid air pockets between the processor and the cooler
     

     

    Original price was: £6.38.Current price is: £6.16.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 120mm PWM PST CO Case Fan w/ Cable Splitter for Continuous Operation, Black, Fluid Dynamic, 200-1800 RPM Quick View

    ARCTIC P12 120mm PWM PST CO Case Fan w/ Cable Splitter for Continuous Operation, Black, Fluid Dynamic, 200-1800 RPM



    Pressure-optimised 120 mm Fan with PWM PST for Continuous Operation

     
    Optimised for Static Pressure
    During the development of the new P12 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST CO is particularly suitable for use on heatsinks and radiators.
     
     
    More Efficient Technology
    The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST CO to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.
     
     
    For Continuous Operation
    The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.
     
     
    Maximum Quietness, Minimum Vibration
    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. 
    Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
     
     
    Extended Life Span
    A 10C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.  Consequently, we have extended the warranty to 10 years.
     
     
    200 to 1800 RPM regulated via PWM
    With a wide range of regulation and the PWM Sharing Technology (PST), the P12 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
     
     
    0 dB Mode
    The P12 PWM PST CO is able to switch into silent passive mode when PWM signal is below 5 % due to its new motor. This allows working at your PC in complete silence without any unwanted noise.
     
     
    Two Way Installation
    • Push warm air out of the case
    • Pull cool air into your case
    Original price was: £6.37.Current price is: £6.15.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pressure Optimised 120mm Case Fan, Black, Fluid Dynamic, 1800 RPM Quick View

    ARCTIC P12 Pressure Optimised 120mm Case Fan, Black, Fluid Dynamic, 1800 RPM

     
    Pressure-optimised 120 mm Fan
     
    Optimised for Static Pressure
    During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static 
    pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. 
    Therefore, the P12 is particularly suitable for use on heatsinks and radiators.
     
     
    High Quality Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     
    Two Way Installation
    • Push warm air out of the case
    • Pull cool air into your case
     
    Original price was: £3.64.Current price is: £3.51.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pressure Optimised 120mm Case Fans (5 Pack), Black, Fluid Dynamic, 1800 RPM, Value Pack Quick View

    ARCTIC P12 Pressure Optimised 120mm Case Fans (5 Pack), Black, Fluid Dynamic, 1800 RPM, Value Pack

     
    Pressure-optimised 120 mm Fan Value Pack (5 Fans)
     
    Optimised for Static Pressure
    During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static 
    pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. 
    Therefore, the P12 is particularly suitable for use on heatsinks and radiators.
     
     
    High Quality Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     
    Two Way Installation
    • Push warm air out of the case
    • Pull cool air into your case

     

    Original price was: £16.20.Current price is: £15.64.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro 120mm PWM Case Fan, Fluid Dynamic Bearing, 600-3000 RPM, Black Quick View

    ARCTIC P12 Pro 120mm PWM Case Fan, Fluid Dynamic Bearing, 600-3000 RPM, Black



    P12 Pro 120mm PWM Fan

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm
    • Connector: 4-Pin Fan Plug
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.
     
     
     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £5.86.Current price is: £5.66.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro ARGB 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, Black Quick View

    ARCTIC P12 Pro ARGB 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, Black



    P12 Pro A-RGB 120 mm A-RGB PWM Fan with Cable Splitter

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £10.45.Current price is: £10.09.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro ARGB 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, White Quick View

    ARCTIC P12 Pro ARGB 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, White



    P12 Pro A-RGB 120 mm A-RGB PWM Fan with Cable Splitter

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £11.37.Current price is: £10.98.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro ARGB 120mm PWM Case Fans w/ Cable Splitters (3 Pack), Fluid Dynamic Bearing, 600-3000 RPM, Black Quick View

    ARCTIC P12 Pro ARGB 120mm PWM Case Fans w/ Cable Splitters (3 Pack), Fluid Dynamic Bearing, 600-3000 RPM, Black



    P12 Pro A-RGB 120 mm A-RGB PWM Fan with Cable Splitter - 3 Pack

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £29.41.Current price is: £28.39.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro ARGB 120mm PWM Case Fans w/ Cable Splitters (3 Pack), Fluid Dynamic Bearing, 600-3000 RPM, White Quick View

    ARCTIC P12 Pro ARGB 120mm PWM Case Fans w/ Cable Splitters (3 Pack), Fluid Dynamic Bearing, 600-3000 RPM, White



    P12 Pro A-RGB 120 mm A-RGB PWM Fan with Cable Splitter - 3 Pack

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £30.68.Current price is: £29.62.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro PST 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, Black Quick View

    ARCTIC P12 Pro PST 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, Black



    P12 Pro PST 120 mm PWM Fan with Cable Splitter

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £5.87.Current price is: £5.67.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro PST 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, White Quick View

    ARCTIC P12 Pro PST 120mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 600-3000 RPM, White



    P12 Pro PST 120 mm PWM Fan with Cable Splitter

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £6.57.Current price is: £6.34.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro PST 120mm PWM Case Fans w/ Cable Splitters (5 Pack), Fluid Dynamic Bearing, 600-3000 RPM, Black Quick View

    ARCTIC P12 Pro PST 120mm PWM Case Fans w/ Cable Splitters (5 Pack), Fluid Dynamic Bearing, 600-3000 RPM, Black



    P12 Pro PST 120 mm PWM Fan with Cable Splitter - 5 Pack

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £25.71.Current price is: £24.82.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Pro PST CO 120mm PWM Case Fan w/ Cable Splitter for Continuous Operation, Dual Ball Bearing, 600-3000 RPM, Black Quick View

    ARCTIC P12 Pro PST CO 120mm PWM Case Fan w/ Cable Splitter for Continuous Operation, Dual Ball Bearing, 600-3000 RPM, Black



    P12 Pro PST CO 120 mm PWM Fan with Cable Splitter for Continuous Operation

    • Fan Speed: 600-3000 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 77 cfm | 131 m3/h
    • Static Pressure: 6.9 mmH2O
    • Fan Bearing: Dual Ball Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (DBB)

    A dual ball bearing with an extended rotor shaft ensures high durability and maximum lifespan at high rotational speeds.
     
     

     
     
    Automated Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £9.34.Current price is: £9.02.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Silent Pressure Optimised 120mm Case Fan, Black, Fluid Dynamic, 1050 RPM Quick View

    ARCTIC P12 Silent Pressure Optimised 120mm Case Fan, Black, Fluid Dynamic, 1050 RPM

     
    Pressure-optimised 120 mm Fan
     
    Optimised for Static Pressure
    During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static 
    pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. 
    Therefore, the P12 is particularly suitable for use on heatsinks and radiators.
     
     
    High Quality Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     
    Virtually Silent Motor
    At low fan speed, the motor is the main source of unwanted noise. A motor developed in Germany with an enhanced bearing reduces friction and noise.
     
     
    Two Way Installation
    • Push warm air out of the case
    • Pull cool air into your case

     

    Original price was: £3.81.Current price is: £3.68.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P12 Slim 120mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 200-2100 RPM Quick View

    ARCTIC P12 Slim 120mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 200-2100 RPM

     

    Pressure-optimised 120 mm PWM Fan with integrated Y-cable

     

    Ideal Where Space Is Limited

    Unlike normal case fans, which are 25 mm thick, the P12 Slim PWM PST has an installation depth of only 15 mm. This makes it a predestined fan for small form factor builds.





    Optimised For Static Pressure

    During the development of the new P12 Slim PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Slim PWM PST is particularly suitable for use on covered case vents or inlets with filters.





    More Efficient Technology

    The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 Slim PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.




     

    Maximum Quietness, Minimum Vibration

    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.




    Extended Life Span

    A 10°C lower motor temperature roughly doubles the life span of a fan.The new ARCTIC motor has a four times longer service life through its low coil temperature.Consequently, we have extended the warranty to 10 years.





    200 To 2100 Rpm Regulated Via PWN PST

    With a wide range of regulation and the PWM Sharing Technology (PST), the P12 Slim PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.





    High Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.





    Two Way Installation

    • Push warm air out of the case
    • Pull cool air into your case
    Original price was: £4.65.Current price is: £4.49.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 140mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 200-1700 RPM Quick View

    ARCTIC P14 140mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 200-1700 RPM


    Pressure-optimised 140 mm Fan with PWM PST

     

    Optimised For Static Pressure

    During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.


     

     
    More Efficient Technology
     
    The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without compromising the performance.





    Maximum Quietness, Minimum Vibration
     
    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5% of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
     



     

    Extended Life Span
     
    A 10°C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.





    200 To 1700 Rpm Regulated Via PWM PST
     
    With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
     



     

    High Quality Bearing
     
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.





     
    Two Way Installation
     
    • Push warm air out of the case
    • Pull cool air into your case
     

     

    Original price was: £5.52.Current price is: £5.33.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 140mm Pressure Optimised Slim PWM PST Fan w/ Cable Splitter, Black, Fluid Dynamic, 120-1800 RPM Quick View

    ARCTIC P14 140mm Pressure Optimised Slim PWM PST Fan w/ Cable Splitter, Black, Fluid Dynamic, 120-1800 RPM



    Ideal for Small Spaces

     
    Unlike standard 140 mm case fans with a thickness of 27 mm, the P14 Slim PWM PST has a mounting depth of only 16 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are already included.





    Optimised for High Static Pressure

    Because the fan design of the P14 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow — even with increased air resistance. This makes the P14 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware.





    Maximum Quietness, Minimum Vibration

    The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.





    Improved Service Life

    The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation.





    120 to 1800 rpm Controlled via PWM PST

    With a wide speed range and innovative PWM Sharing Technology (PST), the P14 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.





    High-Quality Sleeve Bearing

    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.





    0dB Mode — Zero rpm

    The speed of the P14 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand.





    Versatile Use

    The P14 Slim PWM PST allows customisable installation in the case. It can both suck in cool air as an Intake fan and push out warm air as an Exhaust fan. The fan also offers both push and pull installation options on the radiator.
    Original price was: £5.35.Current price is: £5.17.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pressure Optimised 140mm Case Fan, Black, Fluid Dynamic, 1700 RPM Quick View

    ARCTIC P14 Pressure Optimised 140mm Case Fan, Black, Fluid Dynamic, 1700 RPM


    Pressure-optimised 140 mm Fan
     

    Optimised For Static Pressure
    During the development of the new P14, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 is particularly suitable for use on heatsinks and radiators.
     


    High Quality Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.


     
    Two Way Installation

    - Push warm air out of the case
     
    - Pull cool air into your case
     

     

    Original price was: £4.86.Current price is: £4.69.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pressure Optimised 140mm Case Fans (5 Pack), Black, Fluid Dynamic, 1700 RPM, Value Pack Quick View

    ARCTIC P14 Pressure Optimised 140mm Case Fans (5 Pack), Black, Fluid Dynamic, 1700 RPM, Value Pack



    Pressure-Optimised 140 mm Fan - 5-Pack

     
     
    Optimised for Static Pressure
    During the development of the new P14, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 is particularly suitable for use on heatsinks and radiators.
     

     
    High Quality Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     

     
    Two Way Installation
    Push warm air out of the case
    Pull cool air into your case


     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14.
     

     

    Original price was: £22.66.Current price is: £21.88.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro 140mm PWM Case Fan, Fluid Dynamic Bearing, 400-2500 RPM, Black Quick View

    ARCTIC P14 Pro 140mm PWM Case Fan, Fluid Dynamic Bearing, 400-2500 RPM, Black



    P14 Pro 140mm PWM Fan

    • Fan Speed: 400-2500 rpm, PWM controlled, 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm
    • Connector: 4-Pin Fan Plug
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25dB(A) – ideal for quiet, powerful cooling.
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.
     
     
     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn’t just a promise – it’s a testament to our confidence in their durability.
     

     

    Original price was: £7.19.Current price is: £6.94.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro ARGB 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, Black Quick View

    ARCTIC P14 Pro ARGB 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, Black



    P14 Pro A-RGB 140 mm A-RGB PWM Fan with Cable Splitter

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £12.46.Current price is: £12.03.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro ARGB 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, White Quick View

    ARCTIC P14 Pro ARGB 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, White



    P14 Pro A-RGB 140 mm A-RGB PWM Fan with Cable Splitter

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £13.27.Current price is: £12.81.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro ARGB 140mm PWM Case Fans w/ Cable Splitters (3 Pack), Fluid Dynamic Bearing, 400-2500 RPM, Black Quick View

    ARCTIC P14 Pro ARGB 140mm PWM Case Fans w/ Cable Splitters (3 Pack), Fluid Dynamic Bearing, 400-2500 RPM, Black



    P14 Pro A-RGB 140 mm A-RGB PWM Fan with Cable Splitter

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • LEDs: 12x A-RGB Gen2 LEDs
     
     

     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £34.28.Current price is: £33.10.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro PST 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, Black Quick View

    ARCTIC P14 Pro PST 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, Black



    P14 Pro PST 140 mm PWM Fan with Cable Splitter

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £6.92.Current price is: £6.68.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro PST 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, White Quick View

    ARCTIC P14 Pro PST 140mm PWM Case Fan w/ Cable Splitter, Fluid Dynamic Bearing, 400-2500 RPM, White



    P14 Pro PST 140 mm PWM Fan with Cable Splitter

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £8.08.Current price is: £7.80.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro PST 140mm PWM Case Fans w/ Cable Splitters (5 Pack), Fluid Dynamic Bearing, 400-2500 RPM, Black Quick View

    ARCTIC P14 Pro PST 140mm PWM Case Fans w/ Cable Splitters (5 Pack), Fluid Dynamic Bearing, 400-2500 RPM, Black



    P14 Pro PST 140 mm PWM Fan with Cable Splitter - 5 Pack

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow: 110 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (FDB)

    A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations.
     
     

     
     
    Automated Two-Plane Balancing

    An automated two-level measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £31.54.Current price is: £30.45.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P14 Pro PST CO 140mm PWM Case Fan w/ Cable Splitter for Continuous Operation, Dual Ball Bearing, 400-2500 RPM, Black Quick View

    ARCTIC P14 Pro PST CO 140mm PWM Case Fan w/ Cable Splitter for Continuous Operation, Dual Ball Bearing, 400-2500 RPM, Black



    P14 Pro PST CO 140 mm PWM Fan with Cable Splitter for Continuous Operation

    • Fan Speed: 400-2500 rpm (PWM controlled), 0 rpm below 5% PWM
    • Airflow:1107 cfm | 186 m3/h
    • Static Pressure: 5.2 mmH2O
    • Fan Bearing: Dual Ball Bearing
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
     
     
     
     
    Efficient Performance at High Air Resistance

    Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters.
     


     
     
    Maximum Performance, Redefined

    Revised fan blade design for an optimal balance of performance and smooth operation.
     
     
     
     
     
    Optimized Bearing-Shaft Design (DBB)

    A dual ball bearing with an extended rotor shaft ensures high durability and maximum lifespan at high rotational speeds.
     
     

     
     
    Automated Two-Plane Balancing

    An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.
     
     
     
     
     
    SOTA Microcontroller

    Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.
     
     
     
     
     
    More Power - Less Noise

    The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.
     
     

     
     
    Minimum Gap Dimensions for Maximum Efficiency

    Enables higher static pressure and maximum airflow efficiency.





    PST – PWM-Based Synchronized Fan Control

    An additional PWM connector allows multiple fans to be synchronized in series using a single header.
     

     
     
     
    6-Year Warranty - Because Satisfaction Matters

    Our products are tested under extreme conditions. The 6-year warranty isn't just a promise - it's a testament to our confidence in their durability.
     
    Original price was: £9.80.Current price is: £9.46.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 80mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter (5 Pack), Black, Fluid Dynamic, 200-3000 RPM, Value Pack Quick View

    ARCTIC P8 80mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter (5 Pack), Black, Fluid Dynamic, 200-3000 RPM, Value Pack

     

    80 mm PWM Fan with Cable Splitter - 5 Pack

    • Optimised for static pressure
    • Ideal choice on heatsinks, radiators and covered case vents
    • Newly developed, very quiet motor
    • Wide RPM range
    • Extended life span
    • High Quality Bearing
    • PWM Sharing Technology (PST) regulates fan speed synchronously
    • Push or pull-configuration
     
     
     
     
     
    Optimised for Static Pressure

    During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.
     
     
     

     
    More Efficient Technology

    The motor is driven by a latest-generation PWM IC, which enables the new P8 PWM PST to operate much more efficiently than its predecessors. This saves energy without compromising performance.
     
     

     
     
    Maximum Quietness, Minimum Vibration

    Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
     
     
     

     
    Extended Life Span

    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.
     
     

     
     
    200 to 3000 RPM Regulated via PWM PST

    Thanks to the 4-Pin Connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
     
     
     

     
    High-Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     
     

     
    Two Way Installation
    • Push warm air out of the case
    • Pull cool air into your case
     
    Original price was: £21.01.Current price is: £20.29.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 80mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 200-3000 RPM Quick View

    ARCTIC P8 80mm Pressure Optimised PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 200-3000 RPM




    Pressure-optimised 80 mm Fan with PWM PST


     

    Optimised For Static Pressure

    During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.




     
    More Efficient Technology

    The motor is driven by a latest-generation PWM IC, which enables the new P8 PWM PST to operate much more efficiently than its predecessors. This saves energy without compromising performance.




     
    Maximum Quietness, Minimum Vibration
     
    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.




     
    Extended Lifespan
     
    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.





    200 To 300 RPM Regulated VIA PWM PST
     
    Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.




     
    High Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.





    Two Way Instillation

    Push warm air out of the case
    Pull cool air into your case

     

    Original price was: £4.48.Current price is: £4.33.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 80mm PWM PST CO Case Fan for Continuous Operation, Pressure-Optimised, Dual Ball Bearing, 200-3000 RPM, Black Quick View

    ARCTIC P8 80mm PWM PST CO Case Fan for Continuous Operation, Pressure-Optimised, Dual Ball Bearing, 200-3000 RPM, Black



    Pressure-Optimised 80 mm Fan with PWM PST for Continuous Operation


     
     
    Optimised for Static Pressure

    During the development of the new P8 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST CO is particularly suitable for use on heatsinks and radiators.
     



     
    For Continuous Operation

    The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.
     





     
    Maximum Quietness, Minimum Vibration

    Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
     



     
    Extended Life Span

    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.
     



     
    200 to 3000 rpm Regulated via PWM

    With a wide range of regulation and the PWM Sharing Technology (PST), the P8 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.
     



     
    Two Way Installation

     - Push warm air out of the case
     - Pull cool air into your case

     

    Original price was: £6.05.Current price is: £5.84.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 Max High-Performance 80mm PWM Case Fan, Fluid Dynamic Bearing, 500-5000 RPM, Black Quick View

    ARCTIC P8 Max High-Performance 80mm PWM Case Fan, Fluid Dynamic Bearing, 500-5000 RPM, Black




    Powerful Cooling

    The P8 Max is a powerful fan with 500 to 5000 rpm.The fan delivers a static pressure of 5.3 mmH2O and generates an airflow of up to 40 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is extremely efficient at 0.19 A. The P8 Max is ideal for 2U server racks, which often require a high airflow to effectively dissipate heat. In addition, it has a 0 dB mode for silent operation in IDLE.





    Extremely Wide Speed Range

    The P8 Max enables precise fan speed (500 to 5000 rpm) via pulse width modulation control, which can be adapted to the individual cooling requirements. The P8 Max enables silent operation when only a low airflow is required and provides a high performance level if needed.





    Low Power Consumption

    The P8 Max is distinguished by its extremely high efficiency. At a speed of 3000 rpm and a voltage of 12 volts, it requires only 0.669 watts, which corresponds to a current of 0.06 amps.





    Optimised for High Static Pressure

    The P8 Max delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P8 Max is also specially suitable for use on heat sinks, radiators, pinholes and filters.





    0 dB Mode - Zero rpm

    The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P8 Max to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case.





    Virtually Silent due Fluid Dynamic Bearing

    As a special feature, the P8 Max is equipped with ARCTIC's proven Hydrodynamic Bearing. This enables the virtually silent operation at low speeds that customers have been asking for. At maximum speed, brute performance is still guaranteed. Although these bearings tend to wear out, ARCTIC does not compromise on durability and still offers the 6-year warranty.





    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a six years manufacturer's guarantee on the P8 Max.
    Original price was: £5.73.Current price is: £5.53.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 Pressure Optimised 80mm Case Fan, Black, Fluid Dynamic, 3000 RPM Quick View

    ARCTIC P8 Pressure Optimised 80mm Case Fan, Black, Fluid Dynamic, 3000 RPM


    Pressure-optimised 80 mm Fan

     

    Optimised For Static Pressure
     
    During the development of the new P8, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 is particularly suitable for use on heatsinks and radiators.
     



     
    High Quality Bearing

    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.




     
    Maximum Quietness, Minimum Vibration

    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.




     
    Two Way Installation
     
    - Push warm air out of the case
     
    - Pull cool air into your case
     
    Original price was: £3.42.Current price is: £3.30.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 Silent Pressure-optimised Extra Quiet 80mm Case Fan, Black, Fluid Dynamic, 1600 RPM. Black Quick View

    ARCTIC P8 Silent Pressure-optimised Extra Quiet 80mm Case Fan, Black, Fluid Dynamic, 1600 RPM. Black



    Pressure-optimised Extra Quiet 80 mm Fan

    • Fan Speed: 1600 rpm
    • Airflow: 15.6 cfm | 26.5 m³/h
    • Static Pressure: 0.62 mmH2O
    • Noise Level: 0.08 Sone
    • Fan Frame: Standard
    • Control Type: Fixed Speed
    • Connector: 3-Pin Connector
    • Fan Bearing: Fluid Dynamic Bearing


     

     

    Optimised for Static Pressure

     
    During the development of the new P8 Silent, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 Silent is particularly suitable for use on heatsinks and radiators.
     
     
     
     
     
    High Quality Bearing
     
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     
     
     
    Virtually Silent Motor
     
    At low fan speed, the motor is the main source of unwanted noise. A motor developed in Germany with an enhanced bearing reduces friction and noise.
     
     
     
     
     
    Two Way Instalation
     
    - Push warm air out of the case
     
    - Pull cool air into your case

     

    Original price was: £3.47.Current price is: £3.35.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 Silent Pressure-optimised Extra Quiet 80mm Case Fans (5 Pack), Black, Fluid Dynamic, 1600 RPM, Black Quick View

    ARCTIC P8 Silent Pressure-optimised Extra Quiet 80mm Case Fans (5 Pack), Black, Fluid Dynamic, 1600 RPM, Black



    Pressure-optimised Extra Quiet 80 mm Fan - 5 Pack

    • Fan Speed: 1600 rpm
    • Airflow: 15.6 cfm | 26.5 m³/h
    • Static Pressure: 0.62 mmH2O
    • Noise Level: 0.08 Sone
    • Fan Frame: Standard
    • Control Type: Fixed Speed
    • Connector: 3-Pin Connector
    • Fan Bearing: Fluid Dynamic Bearing




     

    Optimised for Static Pressure

     
    During the development of the new P8 Silent, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 Silent is particularly suitable for use on heatsinks and radiators.
     
     
     
     
     
    High Quality Bearing
     
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
     
     
     
     
    Virtually Silent Motor
     
    At low fan speed, the motor is the main source of unwanted noise. A motor developed in Germany with an enhanced bearing reduces friction and noise.
     
     
     
     
     
    Two Way Instalation
     
    - Push warm air out of the case
     
    - Pull cool air into your case

     

    Original price was: £16.12.Current price is: £15.57.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P8 Slim 80mm PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 300-3000 RPM Quick View

    ARCTIC P8 Slim 80mm PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 300-3000 RPM




    80 mm Low-Profile PWM Fan with Cable Splitter

    • Speed: 300-3000 rpm (PWM controlled), (0 rpm below 5 % PWM)
    • Airflow: 22.5 cfm
    • Static Pressure: 2.35 mmH2O
    • Bearing: Fluid Dynamic Bearing
    • Connector: 4-Pin Connector + 4-Pin Plug
    • Start-up Voltage: 6.9 V DC
    • Current | Voltage: 0.095 A | 12 V DC
    • Cable Length: 400 mm + 80 mm, Black
     
     
     
     
     
    Optimal for HTPC, SBC and Slim Systems

    Thanks to its low installation height of 15 mm and highly energy-efficient operation, the P8 Slim PWM PST is suitable for use in small PCs such as single-board computers and the entire SFF range.
     




    300 to 3000 rpm Controlled via PWM PST

    With a wide speed range and innovative PWM Sharing Technology (PST), the P8 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.
     




    Ideal for Small Spaces

    Unlike standard 80 mm case fans with a thickness of 25 mm, the P8 Slim PWM PST has a mounting height of only 15 mm. This makes it the ideal choice for Small Form Factor (SFF) builds.
     




    0dB Mode — Zero rpm

    The speed of the P8 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand.
     




    Optimised for High Static Pressure

    Because the fan design of the P8 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow — even with increased air resistance. This makes the P8 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware.
     




    Maximum Smoothness, Minimum Vibration

    The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.
     




    High-Quality Sleeve Bearing

    Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.
     




    Improved Service Life

    The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. The lower coil temperature therefore multiplies the service life and reduces frictional losses for more efficient operation.
     




    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £4.31.Current price is: £4.16.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P9 Max High-Speed 92mm PWM Case Fan, Pressure Optimised, Black, Fluid Dynamic, 450-4300 RPM, 0dB Mode Quick View

    ARCTIC P9 Max High-Speed 92mm PWM Case Fan, Pressure Optimised, Black, Fluid Dynamic, 450-4300 RPM, 0dB Mode



    P9 Max (Black) - 92 mm High-Speed PWM Fan

    • Fan Speed: 450–4300 RPM (PWM controlled), 0 RPM below 5% PWM
    • Airflow: 58.25 CFM
    • Static Pressure: 6.17 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Typical Voltage: 12 V DC
    • Start Up Voltage: 5 V DC
    • Current: 0.34 A
    • Cable Length: 400 mm
    • Connector: 4-Pin Fan Plug
    • Operating Ambient Temperature: 0–40 °C
     

     
     
     
    Powerful Cooling

    The P9 Max is a powerful 92 mm fan with 450 to 4300 rpm.The fan delivers a static pressure of 6.17 mmH2O and generates an airflow of up to 58.25 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is highly efficient at 0.34 A. In addition, it has a 0 dB mode for silent operation in IDLE.





    Extremely Wide Speed Range

    The P9 Max enables precise fan speed via pulse width modulation control, which can be adapted to the individual cooling requirements. The P9 Max enables silent operation when only a low airflow is required and provides a high performance level if needed.





    Optimised for High Static Pressure

    The P9 Max delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P9 Max is also specially suitable for use on heat sinks, radiators, pinholes and filters.





    0 dB Mode - Zero rpm

    The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P9 Max to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case.





    Virtually Silent due Fluid Dynamic Bearing

    As a special feature, the P9 Max is equipped with ARCTIC's proven Hydrodynamic Bearing. This enables the virtually silent operation at low speeds. At maximum speed, brute performance is still guaranteed. Although these bearings tend to wear out, ARCTIC does not compromise on durability and still offers the 6-year warranty.





    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.
     
    Original price was: £6.55.Current price is: £6.33.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P9 PWM PST 92mm Case Fan w/ Cable Splitter, Pressure Optimised, Black, Fluid Dynamic, 200-3000 RPM, 0dB Mode Quick View

    ARCTIC P9 PWM PST 92mm Case Fan w/ Cable Splitter, Pressure Optimised, Black, Fluid Dynamic, 200-3000 RPM, 0dB Mode



    P9 PWM PST (Black) - 92 mm PWM Fan with Cable Splitter

    • Fan Speed:  200-3000 RPM (PWM controlled), 0RPM below 5% PWM
    • Airflow: 38.83 CFM
    • Static Pressure: 3.12 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Typical Voltage: 12 V DC
    • Start Up Voltage: 5 V DC
    • Current: 0.12 A
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • Operating Ambient Temperature: 0–40 °C
     
     
     
     
     
    Powerful Cooling

    The P9 PWM PST is a powerful 92 mm fan with 200 to 3000 rpm.The fan delivers a static pressure of 3.12 mmH2O and generates an airflow of up to 38.83 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is extremely efficient at 0.12 A. In addition, it has a 0 dB mode for silent operation in IDLE.





    Optimised for High Static Pressure

    The P9 PWM PST delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P9 PWM PST is also specially suitable for use on heat sinks, radiators, pinholes and filters.





    0 dB Mode - Zero rpm

    The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P9 PWM PST to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case.





    Virtually Silent due Fluid Dynamic Bearing

    As a special feature, the P9 PWM PST is equipped with ARCTIC's proven Hydrodynamic Bearing. This provides virtually silent operation at all speeds. Although these bearings tend to wear out, ARCTIC does not compromise on durability and offers a 6-year warranty.





    200 to 3000 rpm Regulated via PWM

    With a wide speed range and innovative PWM Sharing Technology (PST), the P9 PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.





    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £4.65.Current price is: £4.49.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P9 PWM PST CO 92mm Case Fan w/ Cable Splitter for Continuous Operation, Black, Dual Ball Bearing, 200-3000 RPM, 0dB Mode Quick View

    ARCTIC P9 PWM PST CO 92mm Case Fan w/ Cable Splitter for Continuous Operation, Black, Dual Ball Bearing, 200-3000 RPM, 0dB Mode



    P9 PWM PST CO (Black) - 92 mm PWM Fan with Cable Splitter for Continuous Operation

    • Fan Speed: 200–3000 RPM (PWM controlled), 0 RPM below 5% PWM
    • Airflow: 38.83 CFM
    • Static Pressure: 3.12 mmH2O
    • Fan Bearing: Dual Ball Bearing
    • Typical Voltage: 12 V DC
    • Start Up Voltage: 5 V DC
    • Current: 0.12 A
    • Cable Length: 400 mm + 80 mm Daisy-Chain Cable
    • Connector: 4-Pin Fan Plug + 4-Pin Socket
    • Operating Ambient Temperature: 0–40 °C
     
     
     

     

    Powerful Cooling

    The P9 PWM PST CO is a powerful 92 mm fan with 200 to 3000 rpm.The fan delivers a static pressure of 3.12 mmH2O and generates an airflow of up to 38.83 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is extremely efficient at 0.12 A. In addition, it has a 0 dB mode for silent operation in IDLE.





    Optimised for High Static Pressure

    The P9 PWM PST CO delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P9 PWM PST CO is also specially suitable for use on heat sinks, radiators, pinholes and filters.





    0 dB Mode - Zero rpm

    The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P9 PWM PST CO to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case.





    Designed for Continuous Operation

    The P9 PWM PST CO is equipped with two japanese ball bearings. This makes these fans particularly durable and resistant to external forces such as heat, dust and vibrations. This variant is therefore the ideal choice for 24/7 operation.





    200 to 3000 rpm Regulated via PWM

    With a wide speed range and innovative PWM Sharing Technology (PST), the P9 PWM PST CO's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.





    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £6.22.Current price is: £6.01.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC P9 Silent 92mm Case Fan, Black, Fluid Dynamic, 1900 RPM Quick View

    ARCTIC P9 Silent 92mm Case Fan, Black, Fluid Dynamic, 1900 RPM



    P9 Silent (Black) - 92 mm Low-Noise Fan

    • Fan Speed: 1900 RPM
    • Airflow: 23.96 CFM
    • Static Pressure: 1.32 mmH2O
    • Fan Bearing: Fluid Dynamic Bearing
    • Typical Voltage: 12 V DC
    • Start Up Voltage: 5 V DC
    • Current: 0.08 A
    • Cable Length: 400 mm
    • Connector: 3-Pin Fan Plug
    • Operating Ambient Temperature: 0-40 °C
     




    Powerful Cooling

    The P9 Silent is a 92 mm fan with 1900 rpm. The fan delivers a static pressure of 1.32 mmH2O, generates an airflow of up to 23.96 cfm and is extremely efficient at only 0.08 A. The fan speed still can be controlled via voltage regulation.
     
     


     
    Optimised for High Static Pressure

    The P9 Silent delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P9 Silent is also specially suitable for use on heat sinks, radiators, pinholes and filters.
     



     
    Virtually Silent due Fluid Dynamic Bearing

    As a special feature, the P9 Silent is equipped with ARCTIC's proven Hydrodynamic Bearing. This provides virtually silent operation at all speeds. Although these bearings tend to wear out, ARCTIC does not compromise on durability and offers a 6-year warranty.
     
     


     
    Almost noiseless motor

    Especially at low fan speeds, the motor is the main source of unwanted noise. A German-designed motor with an improved bearing reduces friction and vibration, thus reducing noise and enabling near-silent operation.
     


     
     
    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.
     
    Original price was: £3.61.Current price is: £3.49.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC S12038-4K 120mm PWM Server Fan for Continuous Operation, Black, Dual Ball Bearing, 600-4000 RPM Quick View

    ARCTIC S12038-4K 120mm PWM Server Fan for Continuous Operation, Black, Dual Ball Bearing, 600-4000 RPM



    S12038-4K - 120 mm 4k rpm Server Fan

    • Speed: 600-4000 rpm, PWM controlled
    • Static Pressure: 11.45 mmH2O
    • Airflow: 106 cfm
    • Bearing: Dual Ball Bearing with Brass Housing
    • Cable Length: 300 mm, Black
    • Connector: 2510 4-Pin Fan Connector
    • Current / Voltage: 0.33 A / 12.0 V DC
    • Start-Up Voltage: 3.1 V DC
    • Current (Maximum): 0.60 A
    • Motor Protection: Features Reverse Polarity Protection





     
    New Standard in Energy Efficiency

    For the same performance, the S12038 consumes 12 % less than the next best competitor, improving the energy efficiency of your server. The reduction of the power consumption is the result of months of motor optimization by ARCTIC engineers with the aim to increase the IT equipment efficiency.
     
    Test Setup
    Fan on Freezer 4U heat sink on 400 W heating element; fan speed set so that the temperature of the heating element is constantly 20°C above the ambient temperature.






    Wide Range of Speeds (600 to 4000 rpm)

    The S12038-4K features a wide range of speeds from 600 to 4000 rpm, which can be controlled either via PWM or voltage regulation.. This wide range enables precise adjustment of the fan to the specific requirements of the server, ensuring efficient cooling performance under different operating conditions. The fan is equipped with a standard 4-pin connector, which also allows connection to 2-pin or 3-pin headers. The 30 cm long cable offers additional flexibility in fan placement.






    Active Cooling for Extended Motor Lifespan

    A 10°C lower motor temperature roughly doubles the service life. The motor of the S12038-4K is not only particularly efficient, but is also actively cooled by an additional impeller in the fan hub.
     
    To ensure a long service life in particularly dusty environments, a sticker to cover the fan hub impeller is included in the packaging.






    Ideal for Server Environments

    Especially in server environments, fans with a high pressure are required to enable sufficient air circulation in the often tightly packed enclosures. The S12038-4K fits into server cases from 3U and serves as an upgrade or replacement for a CPU fan, radiator fan or for system ventilation.






    Ideal for Industrial Application

    In addition to server cooling, it is also used in industrial systems and plays an important role in machine control and automation systems. Reliable and robust, it guarantees performance in various hardware environments and ensures efficient cooling and minimised downtimes.
     
     
     
     

     
    High Airflow and Static Pressure

    Heat sinks and radiators benefit from fans with high static pressure. The S12038-4K has a static pressure of 11,45 mmH2O, which enables it to push air, even through narrow cooling fins. At the same time, it achieves a maximum airflow of 180 m³/h allowing it to quickly dissipate heat from enclosures. These properties make it the ideal choice for a wide range of applications.





     
    Designed for Continuous Operation

    The impeller of the S12038-4K is held by two high-quality Japanese ball bearings in a sturdy brass housing. This design increases the stability, strength and perpendicularity of the fan and minimises sensitivity to influences such as heat and dust. In addition, the brass housing helps to reduce wear on high-speed fans.






    Quality You Can Rely On

    70°C ambient temperature, high dust exposure and changing humidity - we carry out our long-term tests under these extreme conditions to ensure the service life of our products. Some of these test fans have been running for over 15 years.
     
    This not only allows us to continuously improve our products, but the excellent test results also confirm our high manufacturing quality. We are happy to pass this assurance on to our customers and offer a 6-year manufacturer's warranty.
     
    Original price was: £10.72.Current price is: £10.35.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC S12038-8K 120mm PWM Server Fan for Continuous Operation, Black, Dual Ball Bearing, 800-8000 RPM Quick View

    ARCTIC S12038-8K 120mm PWM Server Fan for Continuous Operation, Black, Dual Ball Bearing, 800-8000 RPM



    S12038-8K - 120 mm 8k rpm Server Fan

    • Speed: 800–8000 rpm, PWM controlled
    • Static Pressure: 37 mmH2O
    • Airflow: 220 cfm
    • Bearing: Dual Ball Bearing with Brass Housing
    • Cable Length: 300 mm, Black
    • Connector: 2510 4-Pin Fan Connector
    • Current | Voltage: 2.2 A | 12.0 V DC
    • Start-Up Voltage: 6.5 V DC
    • Current (Maximum): 3.2 A
    • Motor Protection Features: Reverse Polarity Protection, Over Voltage Protection, Over Current Protection
     
     
     
     

     
    New Standard in Energy Efficiency

    For the same performance, the S12038 consumes 22 % less than the next best competitor, improving the energy efficiency of your server. The reduction of the power consumption is the result of months of motor optimization by ARCTIC engineers with the aim to increase the IT equipment efficiency.
     
    Test Setup
    Fan on Freezer 4U heat sink on 500 W heating element; fan speed set so that the temperature of the heating element is constantly 20 °C above the ambient temperature.






    Wide Range of Speeds (800 to 8000 rpm)

    The S12038-8K features a wide range of speeds from 800 to 8000 rpm, which can be controlled either via PWM or voltage regulation. This wide range enables precise adjustment of the fan to the specific requirements of the server, ensuring efficient cooling performance under different operating conditions. The fan is equipped with a standard 4-pin connector, which also allows connection to 2-pin or 3-pin headers. The 30 cm long cable offers additional flexibility in fan placement.





     
    Active Cooling for Extended Motor Lifespan

    A 10 °C lower motor temperature roughly doubles the service life. The motor of the S12038-8K is not only particularly efficient, but is also actively cooled by an additional impeller in the fan hub.
     
    To ensure a long service life in particularly dusty environments, a sticker to cover the fan hub impeller is included in the packaging.





     
    Ideal for Server Environments

    Especially in server environments, fans with a high pressure are required to enable sufficient air circulation in the often tightly packed enclosures. The S12038-8K fits into server cases from 3U and serves as an upgrade or replacement for a CPU fan, radiator fan or for system ventilation.





     
    Ideal for Industrial Application

    In addition to server cooling, it is also used in industrial systems and plays an important role in machine control and automation systems. Reliable and robust, it guarantees performance in various hardware environments and ensures efficient cooling and minimised downtimes.





     
    High Airflow and Static Pressure

    Heat sinks and radiators benefit from fans with high static pressure. The S12038-8K has a static pressure of 37 mmH2O, which enables it to push air, even through narrow cooling fins. At the same time, it achieves a maximum airflow of 370 m³/h allowing it to quickly dissipate heat from enclosures. These properties make it the ideal choice for a wide range of applications.






    Designed for Continuous Operation

    The impeller of the S12038-8K is held by two high-quality Japanese ball bearings in a sturdy brass housing. This design increases the stability, strength and perpendicularity of the fan and minimises sensitivity to influences such as heat and dust. In addition, the brass housing helps to reduce wear on high-speed fans.





     
    Quality You Can Rely On

    70 °C ambient temperature, high dust exposure and changing humidity - we carry out our long-term tests under these extreme conditions to ensure the service life of our products. Some of these test fans have been running for over 15 years.
     
    This not only allows us to continuously improve our products, but the excellent test results also confirm our high manufacturing quality. We are happy to pass this assurance on to our customers and offer a 6-year manufacturer's warranty.

     

     

    Original price was: £11.77.Current price is: £11.37.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC S8038-7K 80mm PWM Server Fans (4 Pack), Continuous Operation, Dual Ball Bearing, 500-7000 RPM Quick View

    ARCTIC S8038-7K 80mm PWM Server Fans (4 Pack), Continuous Operation, Dual Ball Bearing, 500-7000 RPM



    80mm 7K RPM Server Fan - 4 Pack

    • Speed: 500–7000 rpm, PWM controlled
    • Static: Pressure 25 mmH2O
    • Airflow: 70 cfm | 118.93 m³/h
    • Bearing: Dual Ball Bearing
    • Cable Length: 300 mm, Black
    • Connector: 4-Pin Connector
    • Current | Voltage: 0.5 A | 12.0 V DC
    • Start up Voltage: 3.6 V DC
     
     
     
     
    New Standards in Energy Efficiency

    For the same performance, the S8038 consumes 25 % less than the next best competitor, improving the energy efficiency of your server. The reduction of the power consumption is the result of months of motor optimization by ARCTIC engineers with the aim to increase the IT equipment efficiency.
    * Test setup: Fan on Freezer 4U heatsink placed on 300 W heater; fan speed set to maintain a constant heater temperature of 30°C above ambient.

     
     


    Wide speed range (500 to 7000 rpm)

    The S8038-7K offers a wide speed range that can be controlled both via PWM and voltage. This enables perfect optimisation of the fan to the specific requirements of the system. With a speed range from 500 rpm to 7000 rpm, it offers an ideal balance between cooling performance and noise development despite different requirements. The standard 4-pin connection additionally allows the S8038-7K to be connected to 2-pin or 3-pin headers and thus be controlled by voltage instead of PWM. The 30 cm long cable offers excellent flexibility when positioning the fan.

     

     

    Active Cooling for Extended Motor Lifespan

    A 10 °C lower motor temperature roughly doubles the service life. The motor of the S8038-7k is not only particularly efficient, but is also actively cooled by an additional impeller in the fan hub. This advance not only leads to improved operating efficiency, but also to considerable cost savings in the long term. The scope of delivery includes a sticker for the motor hub, which ensures a long service life even in particularly dusty environments.
     
     



    Ideal for server environments

    Especially in server environments, fans with a high pressure are required to enable sufficient air circulation in the often tightly packed enclosures. The S8038-7K fits into 2U server housings and serves as an upgrade or replacement for a CPU fan, radiator fan or for system ventilation. In addition to server cooling, it is also used in industrial systems and plays an important role in machine control and automation systems. Reliable and robust, it guarantees performance in various hardware environments and ensures efficient cooling and minimised downtimes.

     

     

    High Airflow and Static Pressure

    Heat sinks and radiators benefit from fans with high static pressure. The S8038-7K has a static pressure of 25 mm/H2O, which enables it to push air, even through narrow cooling fins. At the same time, it achieves a maximum airflow of 118,93 m³/h allowing it to quickly dissipate heat from enclosures. These properties make it the ideal choice for a wide range of applications.


     

     
    Designed for Continuous Operation

    The impeller of the S8038-7K is held in place by two Japanese ball bearings, making it not only particularly durable but also less sensitive to external influences such as heat and dust.

     

     

    Quality You Can Rely On

    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Original price was: £34.38.Current price is: £33.19.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Senza Under Desk PC, Ryzen 5 5500GT, 16GB DDR4, 1TB SSD, Wi-Fi 6E, 2.5G LAN, USB-C, Silent Passive Cooling, Windows 11 Home N Quick View

    ARCTIC Senza Under Desk PC, Ryzen 5 5500GT, 16GB DDR4, 1TB SSD, Wi-Fi 6E, 2.5G LAN, USB-C, Silent Passive Cooling, Windows 11 Home N



    Senza Under Desk PC

    • Plug & Play: Ready to Start without Bloatware
    • Silent Passive Cooling
    • Wi-Fi 6E
    • Bluetooth 5.3
    • 2.5G LAN
    • 1TB NVMe SSD with ARCTIC M.2 Pro passive cooler
    • HDMI and DisplayPort connections
    • Supports up to 5K WUHD at 60 Hz for crystal-clear images
    • USB 3.2 Gen2 Type-C & Type-A
    • Concealed cable management
    • Windows 11 N
     
     
     
     
     
    The Space is Yours

    Use the entire area of your desk. Mounted discretely under the table with a functional front panel.





    Enhanced Freedom with a Smart Design

    A complete system that ensures a tidy workspace – without visible cables, without distracting devices. Unlike traditional office or mini PCs, the ARCTIC Senza provides a permanently clean and professional setup.





    Maximum Legroom

    Mounted under the desk for a clear and organized surface and sufficient legroom.





    No Obtrusive Cables

    Neat, concealed cable management with cable clamps, power brick holder, and cable sleeve.





    Robust and Safe Installation

    The robust construction and secure mounting ensure the PC remains firmly under the table, even if the workstation is regularly moved or adjusted. The sturdy construction guarantees long-term reliable use.





    Noise and Maintenance-free Design thanks to Innovative Passive Cooling

    The ARCTIC Senza relies entirely on passive cooling. This makes the Senza completely noise-free with no moving parts and virtually no wear or maintenance. The housing serves as a processor heatsink. The built-in SSD is equipped with an ARCTIC M.2 Pro passive cooler. This combination ensures efficient and quiet operation, ideal for a serene environment at the office or home.





    Maximum Connectivity

    The ARCTIC Senza has optimally integrated, pre-installed antennae. It supports Wi-Fi 6E for ultra-fast, stable Internet and Bluetooth 5.3 for connections to devices such as printers, headsets, or smartphones. It also has a 2.5G LAN interface for wired networks.





    Multi-Display Support

    The ARCTIC Senza offers HDMI and DisplayPort connections for up to two directly connected monitors and supports connection to up to four screens (daisy chain required). It supports up to 5K WUHD at 60 Hz for crystal-clear images and highly accurate details.





    Easy Accessibility

    The panel can be positioned in such a way that important connections remain easily accessible.
    This keeps the USB ports, audio connections and the power button are easily accessible.





    Plug & Play: Ready to Start without Bloatware

    The ARCTIC Senza is delivered with pre-installed Windows 11 N and is ready for immediate use – without the need to set up the operating system or drivers*. Proprietary software is neither pre-installed nor required. Simply connect, set up, and get started.
     
    *Windows 11 N does not include Windows Media Player and has limited playback capabilities. To play media and use the camera, it is necessary to install the Media Feature Pack for Windows 11 N. Please follow the manual for an easy and secure installation.

     

    Original price was: £531.06.Current price is: £512.75.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Senza Under Desk PC, Ryzen 7 5700G, 32GB DDR4, 1TB SSD, Wi-Fi 6E, 2.5G LAN, USB-C, Silent Passive Cooling, Windows 11 Home N Quick View

    ARCTIC Senza Under Desk PC, Ryzen 7 5700G, 32GB DDR4, 1TB SSD, Wi-Fi 6E, 2.5G LAN, USB-C, Silent Passive Cooling, Windows 11 Home N



    Senza Under Desk PC

    • Plug & Play: Ready to Start without Bloatware
    • Silent Passive Cooling
    • Wi-Fi 6E
    • Bluetooth 5.3
    • 2.5G LAN
    • 1TB NVMe SSD with ARCTIC M.2 Pro passive cooler
    • HDMI and DisplayPort connections
    • Supports up to 5K WUHD at 60 Hz for crystal-clear images
    • USB 3.2 Gen2 Type-C & Type-A
    • Concealed cable management
    • Windows 11 N
     
     
     
     
     
    The Space is Yours

    Use the entire area of your desk. Mounted discretely under the table with a functional front panel.





    Enhanced Freedom with a Smart Design

    A complete system that ensures a tidy workspace – without visible cables, without distracting devices. Unlike traditional office or mini PCs, the ARCTIC Senza provides a permanently clean and professional setup.





    Maximum Legroom

    Mounted under the desk for a clear and organized surface and sufficient legroom.





    No Obtrusive Cables

    Neat, concealed cable management with cable clamps, power brick holder, and cable sleeve.





    Robust and Safe Installation

    The robust construction and secure mounting ensure the PC remains firmly under the table, even if the workstation is regularly moved or adjusted. The sturdy construction guarantees long-term reliable use.





    Noise and Maintenance-free Design thanks to Innovative Passive Cooling

    The ARCTIC Senza relies entirely on passive cooling. This makes the Senza completely noise-free with no moving parts and virtually no wear or maintenance. The housing serves as a processor heatsink. The built-in SSD is equipped with an ARCTIC M.2 Pro passive cooler. This combination ensures efficient and quiet operation, ideal for a serene environment at the office or home.





    Maximum Connectivity

    The ARCTIC Senza has optimally integrated, pre-installed antennae. It supports Wi-Fi 6E for ultra-fast, stable Internet and Bluetooth 5.3 for connections to devices such as printers, headsets, or smartphones. It also has a 2.5G LAN interface for wired networks.





    Multi-Display Support

    The ARCTIC Senza offers HDMI and DisplayPort connections for up to two directly connected monitors and supports connection to up to four screens (daisy chain required). It supports up to 5K WUHD at 60 Hz for crystal-clear images and highly accurate details.





    Easy Accessibility

    The panel can be positioned in such a way that important connections remain easily accessible.
    This keeps the USB ports, audio connections and the power button are easily accessible.





    Plug & Play: Ready to Start without Bloatware

    The ARCTIC Senza is delivered with pre-installed Windows 11 N and is ready for immediate use – without the need to set up the operating system or drivers*. Proprietary software is neither pre-installed nor required. Simply connect, set up, and get started.
     
    *Windows 11 N does not include Windows Media Player and has limited playback capabilities. To play media and use the camera, it is necessary to install the Media Feature Pack for Windows 11 N. Please follow the manual for an easy and secure installation.

     

    Original price was: £640.67.Current price is: £618.58.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Senza Under Desk PC, Ryzen 7 5700G, 32GB DDR4, 1TB SSD, Wi-Fi 6E, 2.5G LAN, USB-C, Silent Passive Cooling, Windows 11 Pro N Quick View

    ARCTIC Senza Under Desk PC, Ryzen 7 5700G, 32GB DDR4, 1TB SSD, Wi-Fi 6E, 2.5G LAN, USB-C, Silent Passive Cooling, Windows 11 Pro N



    Senza Under Desk PC

    • Plug & Play: Ready to Start without Bloatware
    • Silent Passive Cooling
    • Wi-Fi 6E
    • Bluetooth 5.3
    • 2.5G LAN
    • 1TB NVMe SSD with ARCTIC M.2 Pro passive cooler
    • HDMI and DisplayPort connections
    • Supports up to 5K WUHD at 60 Hz for crystal-clear images
    • USB 3.2 Gen2 Type-C & Type-A
    • Concealed cable management
    • Windows 11 N
     
     
     
     
     
    The Space is Yours

    Use the entire area of your desk. Mounted discretely under the table with a functional front panel.





    Enhanced Freedom with a Smart Design

    A complete system that ensures a tidy workspace – without visible cables, without distracting devices. Unlike traditional office or mini PCs, the ARCTIC Senza provides a permanently clean and professional setup.





    Maximum Legroom

    Mounted under the desk for a clear and organized surface and sufficient legroom.





    No Obtrusive Cables

    Neat, concealed cable management with cable clamps, power brick holder, and cable sleeve.





    Robust and Safe Installation

    The robust construction and secure mounting ensure the PC remains firmly under the table, even if the workstation is regularly moved or adjusted. The sturdy construction guarantees long-term reliable use.





    Noise and Maintenance-free Design thanks to Innovative Passive Cooling

    The ARCTIC Senza relies entirely on passive cooling. This makes the Senza completely noise-free with no moving parts and virtually no wear or maintenance. The housing serves as a processor heatsink. The built-in SSD is equipped with an ARCTIC M.2 Pro passive cooler. This combination ensures efficient and quiet operation, ideal for a serene environment at the office or home.





    Maximum Connectivity

    The ARCTIC Senza has optimally integrated, pre-installed antennae. It supports Wi-Fi 6E for ultra-fast, stable Internet and Bluetooth 5.3 for connections to devices such as printers, headsets, or smartphones. It also has a 2.5G LAN interface for wired networks.





    Multi-Display Support

    The ARCTIC Senza offers HDMI and DisplayPort connections for up to two directly connected monitors and supports connection to up to four screens (daisy chain required). It supports up to 5K WUHD at 60 Hz for crystal-clear images and highly accurate details.





    Easy Accessibility

    The panel can be positioned in such a way that important connections remain easily accessible.
    This keeps the USB ports, audio connections and the power button are easily accessible.





    Plug & Play: Ready to Start without Bloatware

    The ARCTIC Senza is delivered with pre-installed Windows 11 N and is ready for immediate use – without the need to set up the operating system or drivers*. Proprietary software is neither pre-installed nor required. Simply connect, set up, and get started.
     
    *Windows 11 N does not include Windows Media Player and has limited playback capabilities. To play media and use the camera, it is necessary to install the Media Feature Pack for Windows 11 N. Please follow the manual for an easy and secure installation.

     

    Original price was: £656.33.Current price is: £633.70.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Summair 2Go Powerful Handheld Fan, Up to 77 Hours of Battery, Ergonomic Handle with Fold-Out Stand, Black Quick View

    ARCTIC Summair 2Go Powerful Handheld Fan, Up to 77 Hours of Battery, Ergonomic Handle with Fold-Out Stand, Black



    Summair 2Go - Powerful Handheld Fan with Extra-Long Battery Life

    • Long-Lasting - The rechargeable, replaceable 5000 mAh battery provides a runtime of up to 77 hours.
    • Practical - Thanks to its handy design and compact dimensions, the Summair 2Go is the perfect companion for on the go – always ready for use and easy to transport.
    • Powerful - The Summair 2Go generates a quiet breeze at low speed and a powerful airflow at maximum power.
    • Sophisticated Design - The Summair 2Go combines an airflow-optimized ARCTIC fan with a long-lasting battery, ensuring reliable cooling even when you're on the go.
    • Proven Expertise - Developed with over 20 years of experience in the fan industry, it offers the expected ARCTIC quality and reliability – just like our high-quality PC and server fans.
    • Secure Stand - The Summair 2Go has a rubberised folding foot that provides stable support, even on delicate surfaces, without causing any scratches.
    • Comfortable Handling - The Summair 2Go is ergonomically shaped and the surface is discreetly textured to provide a secure and fatigue-free grip even when on the move.

     

    Original price was: £17.70.Current price is: £17.09.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Summair 2Go Powerful Handheld Fan, Up to 77 Hours of Battery, Ergonomic Handle with Fold-Out Stand, Deep Blue Quick View

    ARCTIC Summair 2Go Powerful Handheld Fan, Up to 77 Hours of Battery, Ergonomic Handle with Fold-Out Stand, Deep Blue



    Summair 2Go - Powerful Handheld Fan with Extra-Long Battery Life

    • Long-Lasting - The rechargeable, replaceable 5000 mAh battery provides a runtime of up to 77 hours.
    • Practical - Thanks to its handy design and compact dimensions, the Summair 2Go is the perfect companion for on the go – always ready for use and easy to transport.
    • Powerful - The Summair 2Go generates a quiet breeze at low speed and a powerful airflow at maximum power.
    • Sophisticated Design - The Summair 2Go combines an airflow-optimized ARCTIC fan with a long-lasting battery, ensuring reliable cooling even when you're on the go.
    • Proven Expertise - Developed with over 20 years of experience in the fan industry, it offers the expected ARCTIC quality and reliability – just like our high-quality PC and server fans.
    • Secure Stand - The Summair 2Go has a rubberised folding foot that provides stable support, even on delicate surfaces, without causing any scratches.
    • Comfortable Handling - The Summair 2Go is ergonomically shaped and the surface is discreetly textured to provide a secure and fatigue-free grip even when on the move.

     

    Original price was: £17.70.Current price is: £17.09.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Summair 2Go Powerful Handheld Fan, Up to 77 Hours of Battery, Ergonomic Handle with Fold-Out Stand, White Quick View

    ARCTIC Summair 2Go Powerful Handheld Fan, Up to 77 Hours of Battery, Ergonomic Handle with Fold-Out Stand, White



    Summair 2Go - Powerful Handheld Fan with Extra-Long Battery Life

    • Long-Lasting - The rechargeable, replaceable 5000 mAh battery provides a runtime of up to 77 hours.
    • Practical - Thanks to its handy design and compact dimensions, the Summair 2Go is the perfect companion for on the go – always ready for use and easy to transport.
    • Powerful - The Summair 2Go generates a quiet breeze at low speed and a powerful airflow at maximum power.
    • Sophisticated Design - The Summair 2Go combines an airflow-optimized ARCTIC fan with a long-lasting battery, ensuring reliable cooling even when you're on the go.
    • Proven Expertise - Developed with over 20 years of experience in the fan industry, it offers the expected ARCTIC quality and reliability – just like our high-quality PC and server fans.
    • Secure Stand - The Summair 2Go has a rubberised folding foot that provides stable support, even on delicate surfaces, without causing any scratches.
    • Comfortable Handling - The Summair 2Go is ergonomically shaped and the surface is discreetly textured to provide a secure and fatigue-free grip even when on the move.

     

    Original price was: £17.70.Current price is: £17.09.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC TP-3 Premium Performance Gap Filler Thermal Pad (Single), Easy Installation, 100 x 100 mm, 0.5 mm Thick, Blue Quick View

    ARCTIC TP-3 Premium Performance Gap Filler Thermal Pad (Single), Easy Installation, 100 x 100 mm, 0.5 mm Thick, Blue



    High Performance — Very Soft

    Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.



    Minimization of Thermal Resistance
    The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.



    Versatile Applications
    Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards, and electronic devices in general.



    Safe Handling
    The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.



    Bridging Gaps
    The TP-3 is softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridge uneven surface and air gaps without stressing sensitive and protruding components.
    Original price was: £4.58.Current price is: £4.42.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC TP-3 Premium Performance Gap Filler Thermal Pad (Single), Easy Installation, 100 x 100 mm, 1.0 mm Thick, Blue Quick View

    ARCTIC TP-3 Premium Performance Gap Filler Thermal Pad (Single), Easy Installation, 100 x 100 mm, 1.0 mm Thick, Blue



    High Performance — Very Soft

    Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.



    Minimization of Thermal Resistance
    The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.



    Versatile Applications
    Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards, and electronic devices in general.



    Safe Handling
    The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.



    Bridging Gaps
    The TP-3 is softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridge uneven surface and air gaps without stressing sensitive and protruding components.
    Original price was: £5.73.Current price is: £5.53.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC TP-3 Premium Performance Gap Filler Thermal Pad (Single), Easy Installation, 100 x 100 mm, 1.5 mm Thick, Blue Quick View

    ARCTIC TP-3 Premium Performance Gap Filler Thermal Pad (Single), Easy Installation, 100 x 100 mm, 1.5 mm Thick, Blue



    High Performance — Very Soft

    Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.



    Minimization of Thermal Resistance
    The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.



    Versatile Applications
    Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards, and electronic devices in general.



    Safe Handling
    The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.



    Bridging Gaps
    The TP-3 is softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridge uneven surface and air gaps without stressing sensitive and protruding components.
    Original price was: £6.74.Current price is: £6.51.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC TP-3 Premium Performance Gap Filler Thermal Pads (4-Pack), Easy Installation, 120 x 120 mm, 0.5 mm Thick, Blue Quick View

    ARCTIC TP-3 Premium Performance Gap Filler Thermal Pads (4-Pack), Easy Installation, 120 x 120 mm, 0.5 mm Thick, Blue



    High Performance — Very Soft

    Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.



    Minimization of Thermal Resistance
    The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.



    Versatile Applications
    Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards, and electronic devices in general.



    Safe Handling
    The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.



    Bridging Gaps
    The TP-3 is softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridge uneven surface and air gaps without stressing sensitive and protruding components.
    Original price was: £4.93.Current price is: £4.76.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC TP-3 Premium Performance Gap Filler Thermal Pads (4-Pack), Easy Installation, 120 x 120 mm, 1.0 mm Thick, Blue Quick View

    ARCTIC TP-3 Premium Performance Gap Filler Thermal Pads (4-Pack), Easy Installation, 120 x 120 mm, 1.0 mm Thick, Blue



    High Performance — Very Soft

    Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.



    Minimization of Thermal Resistance
    The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.



    Versatile Applications
    Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards, and electronic devices in general.



    Safe Handling
    The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.



    Bridging Gaps
    The TP-3 is softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridge uneven surface and air gaps without stressing sensitive and protruding components.
    Original price was: £5.79.Current price is: £5.59.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC TP-3 Premium Performance Gap Filler Thermal Pads (4-Pack), Easy Installation, 120 x 120 mm, 1.5 mm Thick, Blue Quick View

    ARCTIC TP-3 Premium Performance Gap Filler Thermal Pads (4-Pack), Easy Installation, 120 x 120 mm, 1.5 mm Thick, Blue



    High Performance — Very Soft

    Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.



    Minimization of Thermal Resistance
    The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.



    Versatile Applications
    Heat-conducting, vibration-damping, mouldable, electrically insulating — safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets, and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards, and electronic devices in general.



    Safe Handling
    The ARCTIC TP-3 is electrically insulating, non-adhesive, and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.



    Bridging Gaps
    The TP-3 is softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridge uneven surface and air gaps without stressing sensitive and protruding components.
    Original price was: £6.77.Current price is: £6.54.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC X1 Single Monitor Arm, Up to 43" Monitors / 49" Ultrawide, 180° Swivel, 360° Rotation Quick View

    ARCTIC X1 Single Monitor Arm, Up to 43″ Monitors / 49″ Ultrawide, 180° Swivel, 360° Rotation


    Desk Mount Monitor Arm

     

    Full Motion For More Comfort

    Thanks to the swivelling arm, the monitor remains flexibly movable even after mounting. It can also be adjusted in height with a simple handle. This makes it child's play to pull the monitor up, move it away or completely realign the height, depth and tilt.





    Ergonomic Screen Adjustment

    The X1 turns the simplest screens into ergonomic wonders, and those who spend a lot of time in front of a screen will quickly appreciate this advantage: The optimal adjustment of your screens automatically promotes an ergonomic posture. It doesn't matter whether you work sitting or standing, the monitor arm allows for optimal adjustment to your environment.





    Less Visible Cables

    With the X1, tangled cables around monitors are a thing of the past. The cables can simply be carried in parallel to the arm and hung in the cable channels. In this way, they disappear from the visible area and support a tidy overall appearance.




     

    Simple And Quick Assembly
     
    Thanks to the table clamp, the monitor arm can be placed freely and easily on the edge of the table. The arm is completely pre-assembled and is simply placed on the rod. Assembly or later repositioning is therefore child's play and can be done quickly.





    Universally Compatible
     
    The monitor arm supports ultrawide monitors with a screen diagonal of up to 49", as well as 16:9 monitors with a diagonal of up to 43". The monitor must have a VESA 75 or VESA 100 mount and must not exceed a total weight of 10 kg.
    Original price was: £22.58.Current price is: £21.80.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC X1-3D Single Gas Spring Monitor Arm, Up to 40" Monitors / 43" Ultrawide, 180° Swivel, 360° Rotation Quick View

    ARCTIC X1-3D Single Gas Spring Monitor Arm, Up to 40″ Monitors / 43″ Ultrawide, 180° Swivel, 360° Rotation

     

    Desk Mount Gas Spring Monitor Arm



    Full Motion For More Comfort

    Thanks to the approved gas lift technology, the monitor can be moved completely freely in all directions, even after installation. This makes it child's play to pull the monitor up, move it away or completely realign the height, depth and tilt.




    Ergonomic Screen Adjustment

    The X1-3D turns the simplest screens into ergonomic wonders, and those who spend a lot of time in front of a screen will quickly appreciate this advantage: The optimal adjustment of your screens automatically promotes an ergonomic sitting posture. It doesn't matter whether you work sitting or standing, the monitor arm allows you to optimally adjust it to your environment.


     

    Enlarged Working Area

    Whether you use your desk as a workstation, battlestation or a mix of both. By keeping your 'neutral reach zone' free, the X1-3D provides more space around the monitors and allows you new ways to set up and optimise your workspace.


     

    Less Visible Cables
     
    With the X1-3D, tangled cables around monitors are a thing of the past. The cables can simply be carried and fixed inside the arm. They thus disappear from the visible area and support a tidy overall appearance.


     

    Simple And Quick Assembly
     
    Thanks to the table clamp, the monitor arm can be placed freely and easily on the edge of the table. The arm is completely pre-assembled and is simply placed on the rod. Assembly or later repositioning is therefore child's play and can be done quickly.


     

    Universally Compatible
     
    The monitor arm supports ultrawide monitors with a screen diagonal of up to 49", as well as 16:9 monitors with a diagonal of up to 43". The monitor must have a VESA 75 or VESA 100 mount and must not exceed a total weight of 15 kg.
     
     
    Original price was: £37.86.Current price is: £36.55.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Xtender (Black) Case w/ Tinted Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, USB-C 10Gbps Quick View

    ARCTIC Xtender (Black) Case w/ Tinted Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, USB-C 10Gbps



    Premium E-ATX PC Case

    • Excellent Air Circulation - Open mesh elements for optimal airflow.
    • Elegant Front I/O - Integrated directly into the upper mesh grille and easily accessible, with 1x USB-C Gen, 2x USB-A Gen, 1 x 3,5 mm jack (line-in/out) and power
    • Out-of-the-box Lighting - Equipped with three 140 mm reverse fans and two 120 mm A-RGB fans as well as an illuminated PSU shroud for impressive lighting effects.
    • High-End Compatibility  - Support for two 420 mm radiators and large GPUs up to 360 mm



     
     
    Xtend your Cooling

    The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling even for high-performance components.
     
     


     
    Compatibility for 120 or 140 mm Fans

    Modular, removable fan brackets for installing 140 mm fans at the top or on the side.
    2x P12 Pro A-RGB Fans pre-installed at Rear and 3x P14 Pro Reverse A-RGB Fans pre-installed at side
     



     
    Supports Two 420 mm Radiators

    Supports two 420, 360, 280 or 240 mm radiators for high-performance AIOs and custom loops.
     



     
    Magnetic Mesh Filters

    Easily removable, reinforced filters protect against dust and allow quick cleaning.
     
     


     
    Functional I/O Panel

    No frills. Only the most important and frequently used ports are included.




     
    Tempered Glass Side Panels

    Large tempered glass windows provide a clear view of the hardware.




     
    A-RGB PSU Cover

    Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.
     



     
     
    Flexible Mounting for Up to Six Drives

    Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.
     
     


     
    Includes Accessory Box

    Includes extra screws, cable ties and space for additional small parts.




     
    3D Cable Pass-Throughs for Improved Aesthetics

    For clean cable routing behind the motherboard and a tidy interior.




     
    Clean Cable Management

    Smart cutouts and optimally placed cable straps for easy cable management.
     
    Original price was: £153.71.Current price is: £148.41.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Xtender (Mirror Black) Case w/ Mirror Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, USB-C 10Gbps Quick View

    ARCTIC Xtender (Mirror Black) Case w/ Mirror Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, USB-C 10Gbps



    Premium E-ATX PC Case

    • Excellent Air Circulation - Open mesh elements for optimal airflow.
    • Elegant Front I/O - Integrated directly into the upper mesh grille and easily accessible, with 1x USB-C Gen, 2x USB-A Gen, 1 x 3,5 mm jack (line-in/out) and power
    • Out-of-the-box Lighting - Equipped with three 140 mm reverse fans and two 120 mm A-RGB fans as well as an illuminated PSU shroud for impressive lighting effects.
    • High-End Compatibility  - Support for two 420 mm radiators and large GPUs up to 360 mm



     
     
    Xtend your Cooling

    The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling even for high-performance components.
     
     


     
    Compatibility for 120 or 140 mm Fans

    Modular, removable fan brackets for installing 140 mm fans at the top or on the side.
    2x P12 Pro A-RGB Fans pre-installed at Rear and 3x P14 Pro Reverse A-RGB Fans pre-installed at side
     



     
    Supports Two 420 mm Radiators

    Supports two 420, 360, 280 or 240 mm radiators for high-performance AIOs and custom loops.
     



     
    Magnetic Mesh Filters

    Easily removable, reinforced filters protect against dust and allow quick cleaning.
     
     


     
    Functional I/O Panel

    No frills. Only the most important and frequently used ports are included.




     
    Tempered Glass Side Panels

    Large tempered glass windows provide a clear view of the hardware.




     
    A-RGB PSU Cover

    Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.
     



     
     
    Flexible Mounting for Up to Six Drives

    Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.
     
     


     
    Includes Accessory Box

    Includes extra screws, cable ties and space for additional small parts.




     
    3D Cable Pass-Throughs for Improved Aesthetics

    For clean cable routing behind the motherboard and a tidy interior.




     
    Clean Cable Management

    Smart cutouts and optimally placed cable straps for easy cable management.
     
    Original price was: £153.71.Current price is: £148.41.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Xtender (VG Black) Case w/ Tinted Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, GPU Vertical Mount, USB-C 10Gbps Quick View

    ARCTIC Xtender (VG Black) Case w/ Tinted Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, GPU Vertical Mount, USB-C 10Gbps



    Premium E-ATX PC Case with Vertical GPU Mounting

    • Excellent Air Circulation - Open mesh elements for optimal airflow.
    • Elegant Front I/O - Integrated directly into the upper mesh grille and easily accessible, with 1x USB-C Gen, 2x USB-A Gen, 1 x 3,5 mm jack (line-in/out) and power
    • Out-of-the-box Lighting - Equipped with three 140 mm reverse fans and two 120 mm A-RGB fans as well as an illuminated PSU shroud for impressive lighting effects.
    • Vertical GPU Mounting Kit with a PCIe 5.0 riser cable for stylish and high-performance vertical graphics card mounting.
    • High-End Compatibility  - Support for two 420 mm radiators and large GPUs up to 360 mm, with optional vertical GPU mounting kit



     
     
    Xtend your Cooling

    The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling even for high-performance components.
     
     


     
    Compatibility for 120 or 140 mm Fans

    Modular, removable fan brackets for installing 140 mm fans at the top or on the side.
    2x P12 Pro A-RGB Fans pre-installed at Rear and 3x P14 Pro Reverse A-RGB Fans pre-installed at side
     



     
    Supports Two 420 mm Radiators

    Supports two 420, 360, 280 or 240 mm radiators for high-performance AIOs and custom loops.
     



     
    Magnetic Mesh Filters

    Easily removable, reinforced filters protect against dust and allow quick cleaning.
     
     


     
    Functional I/O Panel

    No frills. Only the most important and frequently used ports are included.




     
    Tempered Glass Side Panels

    Large tempered glass windows provide a clear view of the hardware.




     
    A-RGB PSU Cover

    Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.




     
    Vertical Mounting for Graphics Cards

    Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.



     
     
    Flexible Mounting for Up to Six Drives

    Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.
     
     


     
    Includes Accessory Box

    Includes extra screws, cable ties and space for additional small parts.




     
    3D Cable Pass-Throughs for Improved Aesthetics

    For clean cable routing behind the motherboard and a tidy interior.




     
    Clean Cable Management

    Smart cutouts and optimally placed cable straps for easy cable management.
     
    Original price was: £189.05.Current price is: £182.53.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Xtender (VG Mirror Black) Case w/ Mirror Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, GPU Vertical Mount, USB-C 10Gbps Quick View

    ARCTIC Xtender (VG Mirror Black) Case w/ Mirror Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, GPU Vertical Mount, USB-C 10Gbps



    Premium E-ATX PC Case with Vertical GPU Mounting

    • Excellent Air Circulation - Open mesh elements for optimal airflow.
    • Elegant Front I/O - Integrated directly into the upper mesh grille and easily accessible, with 1x USB-C Gen, 2x USB-A Gen, 1 x 3,5 mm jack (line-in/out) and power
    • Out-of-the-box Lighting - Equipped with three 140 mm reverse fans and two 120 mm A-RGB fans as well as an illuminated PSU shroud for impressive lighting effects.
    • Vertical GPU Mounting Kit with a PCIe 5.0 riser cable for stylish and high-performance vertical graphics card mounting.
    • High-End Compatibility  - Support for two 420 mm radiators and large GPUs up to 360 mm, with optional vertical GPU mounting kit



     
     
    Xtend your Cooling

    The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling even for high-performance components.
     
     


     
    Compatibility for 120 or 140 mm Fans

    Modular, removable fan brackets for installing 140 mm fans at the top or on the side.
    2x P12 Pro A-RGB Fans pre-installed at Rear and 3x P14 Pro Reverse A-RGB Fans pre-installed at side
     



     
    Supports Two 420 mm Radiators

    Supports two 420, 360, 280 or 240 mm radiators for high-performance AIOs and custom loops.
     



     
    Magnetic Mesh Filters

    Easily removable, reinforced filters protect against dust and allow quick cleaning.
     
     


     
    Functional I/O Panel

    No frills. Only the most important and frequently used ports are included.




     
    Tempered Glass Side Panels

    Large tempered glass windows provide a clear view of the hardware.




     
    A-RGB PSU Cover

    Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.




     
    Vertical Mounting for Graphics Cards

    Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.



     
     
    Flexible Mounting for Up to Six Drives

    Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.
     
     


     
    Includes Accessory Box

    Includes extra screws, cable ties and space for additional small parts.




     
    3D Cable Pass-Throughs for Improved Aesthetics

    For clean cable routing behind the motherboard and a tidy interior.




     
    Clean Cable Management

    Smart cutouts and optimally placed cable straps for easy cable management.
     
    Original price was: £189.05.Current price is: £182.53.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Xtender (VG White) Case w/ Clear Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, GPU Vertical Mount, USB-C 10Gbps Quick View

    ARCTIC Xtender (VG White) Case w/ Clear Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, GPU Vertical Mount, USB-C 10Gbps



    Premium E-ATX PC Case with Vertical GPU Mounting

    • Excellent Air Circulation - Open mesh elements for optimal airflow.
    • Elegant Front I/O - Integrated directly into the upper mesh grille and easily accessible, with 1x USB-C Gen, 2x USB-A Gen, 1 x 3,5 mm jack (line-in/out) and power
    • Out-of-the-box Lighting - Equipped with three 140 mm reverse fans and two 120 mm A-RGB fans as well as an illuminated PSU shroud for impressive lighting effects.
    • Vertical GPU Mounting Kit with a PCIe 5.0 riser cable for stylish and high-performance vertical graphics card mounting.
    • High-End Compatibility  - Support for two 420 mm radiators and large GPUs up to 360 mm, with optional vertical GPU mounting kit



     
     
    Xtend your Cooling

    The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling even for high-performance components.
     
     


     
    Compatibility for 120 or 140 mm Fans

    Modular, removable fan brackets for installing 140 mm fans at the top or on the side.
    2x P12 Pro A-RGB Fans pre-installed at Rear and 3x P14 Pro Reverse A-RGB Fans pre-installed at side
     



     
    Supports Two 420 mm Radiators

    Supports two 420, 360, 280 or 240 mm radiators for high-performance AIOs and custom loops.
     



     
    Magnetic Mesh Filters

    Easily removable, reinforced filters protect against dust and allow quick cleaning.
     
     


     
    Functional I/O Panel

    No frills. Only the most important and frequently used ports are included.




     
    Tempered Glass Side Panels

    Large tempered glass windows provide a clear view of the hardware.




     
    A-RGB PSU Cover

    Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.




     
    Vertical Mounting for Graphics Cards

    Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.



     
     
    Flexible Mounting for Up to Six Drives

    Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.
     
     


     
    Includes Accessory Box

    Includes extra screws, cable ties and space for additional small parts.




     
    3D Cable Pass-Throughs for Improved Aesthetics

    For clean cable routing behind the motherboard and a tidy interior.




     
    Clean Cable Management

    Smart cutouts and optimally placed cable straps for easy cable management.
     
    Original price was: £199.64.Current price is: £192.75.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Xtender (White) Case w/ Clear Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, USB-C 10Gbps Quick View

    ARCTIC Xtender (White) Case w/ Clear Glass Side and Front, E-ATX, 5x ARGB Fans, ARGB PSU Shroud, Mesh Airflow, USB-C 10Gbps



    Premium E-ATX PC Case

    • Excellent Air Circulation - Open mesh elements for optimal airflow.
    • Elegant Front I/O - Integrated directly into the upper mesh grille and easily accessible, with 1x USB-C Gen, 2x USB-A Gen, 1 x 3,5 mm jack (line-in/out) and power
    • Out-of-the-box Lighting - Equipped with three 140 mm reverse fans and two 120 mm A-RGB fans as well as an illuminated PSU shroud for impressive lighting effects.
    • High-End Compatibility  - Support for two 420 mm radiators and large GPUs up to 360 mm



     
     
    Xtend your Cooling

    The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling even for high-performance components.
     
     


     
    Compatibility for 120 or 140 mm Fans

    Modular, removable fan brackets for installing 140 mm fans at the top or on the side.
    2x P12 Pro A-RGB Fans pre-installed at Rear and 3x P14 Pro Reverse A-RGB Fans pre-installed at side
     



     
    Supports Two 420 mm Radiators

    Supports two 420, 360, 280 or 240 mm radiators for high-performance AIOs and custom loops.
     



     
    Magnetic Mesh Filters

    Easily removable, reinforced filters protect against dust and allow quick cleaning.
     
     


     
    Functional I/O Panel

    No frills. Only the most important and frequently used ports are included.




     
    Tempered Glass Side Panels

    Large tempered glass windows provide a clear view of the hardware.




     
    A-RGB PSU Cover

    Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.
     



     
     
    Flexible Mounting for Up to Six Drives

    Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.
     
     


     
    Includes Accessory Box

    Includes extra screws, cable ties and space for additional small parts.




     
    3D Cable Pass-Throughs for Improved Aesthetics

    For clean cable routing behind the motherboard and a tidy interior.




     
    Clean Cable Management

    Smart cutouts and optimally placed cable straps for easy cable management.
     
    Original price was: £166.07.Current price is: £160.34.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Z1 Basic Single Monitor Arm, 13" - 43" Monitors, 180° Swivel, 360° Rotation Quick View

    ARCTIC Z1 Basic Single Monitor Arm, 13″ – 43″ Monitors, 180° Swivel, 360° Rotation

     
    More Flexibility
    Turn your monitor horizontal in any direction in an easy and convenient way.
     
     
    Adjustment without Removing the Monitor
    With the Z1 Basic mounting head, tighten or loosen the swivel per your need in just a few seconds. No need to take the monitor down.
     
     
    Quick and Easy Installation
    The monitor arm can be mounted on most surfaces with the sturdy and adjustable clamp which fits the edge of your desk in various thicknesses.
     
     
    Ergonomic Seating Position
    Pay attention to your health, also in the office. So the Z1 Basic your ergonomic seating position through ideal alignment according to your individual eye level.
    Original price was: £18.79.Current price is: £18.14.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Z1 Gen 3 Single Monitor Arm with 4-Port USB 2.0 Hub, up to 43" Monitors / 49" Ultrawide, 180° Swivel, 360° Rotation Quick View

    ARCTIC Z1 Gen 3 Single Monitor Arm with 4-Port USB 2.0 Hub, up to 43″ Monitors / 49″ Ultrawide, 180° Swivel, 360° Rotation

     
    Reclaim Space on Your Desk
     
    Whether you use it as your workstation or your battle station, the ARCTIC Z1 Pro monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.



     
    Optimised Ergonomics
     
    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z1 Pro, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z1 Pro enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.



     
    Also Suitable for Ultrawide Monitors
     
    The ARCTIC Z1 Pro monitor arm supports the latest ultrawide monitors (up to 49 inches) with ease. Classic 16:9 monitors are also compatible (up to 43 inches). The Z1 Pro supports a total load of 15 kg/33 lbs.



     
    Optimal Alignment
     
    The mounting head of the ARCTIC Z1 Pro makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees - the only tools you need are your hands.



     
    USB Hub
     
    The stylish 3.0 USB hub brings four ports directly where you need them most - on your desk.



     
    Cable Management
     
    Sick of cable clutter? With the Z1 Pro's included cable management, unruly cables are a thing of the past.



     
    Simple and Fast Setup
     
    With just a few simple steps and the included tools, the Z1 Pro is ready to use at your table in no time.

     

    Original price was: £26.77.Current price is: £25.84.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Z2 (Gen 3) Dual Monitor Arm with 4-Port USB 2.0 Hub, Up to 34" Monitors / 29" Ultrawide, 180° Swivel, 360° Rotation Quick View

    ARCTIC Z2 (Gen 3) Dual Monitor Arm with 4-Port USB 2.0 Hub, Up to 34″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation

     
    Reclaim Space on Your Desk
     
    Whether you use it as your workstation or your battle station, the ARCTIC Z2 monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.
     


     
    Optimised Ergonomics
     
    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z2, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z2 enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.
     


     
    Also Suitable for Ultrawide Monitors
     
    The ARCTIC Z2 monitor arm supports the latest ultrawide monitors (up to 29 inches) with ease. 
    Classic 16:9 monitors are also compatible (up to 34 inches). The Z2 supports a total load of 15 kg/33 lbs.
     


     
    Optimal Alignment
     
    The mounting head of the ARCTIC Z2 makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees - the only tools you need are your hands.
     


     
    USB Hub
     
    The stylish 2.0 USB hub brings four ports directly where you need them most - on your desk.
     


     
    Cable Management
     
    Sick of cable clutter? With the Z2's included cable management, unruly cables are a thing of the past.
     


     
    Simple and Fast Setup
     
    With just a few simple steps and the included tools, the Z2 is ready to use at your table in no time.
    Original price was: £34.50.Current price is: £33.31.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Z2 Basic Dual Monitor Arm, Up to 32" Monitors / 25" Ultrawide, 180° Swivel, 360° Rotation Quick View

    ARCTIC Z2 Basic Dual Monitor Arm, Up to 32″ Monitors / 25″ Ultrawide, 180° Swivel, 360° Rotation

     
    Work Efficiently
    Increase your efficiency with the Z2 Basic dual monitor arm: It is often helpful to work with multiple screens at the same time to keep important applications parallel in view. The Z2 Basic extends your view and thereby simplifies not only your work, but it also allows you to work more efficiently.
     
     
    More Flexibility
    Turn your monitor horizontal in any direction in an easy and convenient way.
     
     
    Adjustment without Removing the Monitor
    With the Z2 Basic mounting head, tighten or loosen the swivel per your need in just a few seconds. No need to take the monitor down.
     
     
    Quick and Easy Installation
    The monitor arm can be mounted on most surfaces with the sturdy and adjustable clamp which fits the edge of your desk in various thicknesses.
     
     
    Ergonomic Seating Position
    Pay attention to your health, also in the office. So the Z2 Basic your ergonomic seating position through ideal alignment according to your individual eye level.
    Original price was: £28.54.Current price is: £27.55.
    Add to basket
    Add to wishlist
  • Sale! ARCTIC Z2 Pro (Gen3) Dual Monitor Arm with 4-Port USB 3.0 Hub, Up to 34" Monitors / 29" Ultrawide, 180° Swivel, 360° Rotation Quick View

    ARCTIC Z2 Pro (Gen3) Dual Monitor Arm with 4-Port USB 3.0 Hub, Up to 34″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation


    Reclaim Space on Your Desk

    Whether you use it as your workstation or your battle station, the ARCTIC Z2 Pro monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.

     

     
    Optimised Ergonomics

    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z2 Pro, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z2 Pro enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.
     


     
    Also Suitable for Ultrawide Monitors

    The ARCTIC Z2 Pro monitor arm supports the latest ultrawide monitors (up to 29 inches) with ease. Classic 16:9 monitors are also compatible (up to 34 inches). The Z2 Pro supports a total load of 15 kg/33 lbs.
     


     
    Optimal Alignment

    The mounting head of the ARCTIC Z2 Pro makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees - the only tools you need are your hands.
     


     
    USB Hub

    The stylish 3.0 USB hub brings four ports directly where you need them most - on your desk.
     


     
    Cable Management

    Sick of cable clutter? With the Z2 Pro's included cable management, unruly cables are a thing of the past.
     


     
    Simple and Fast Setup
     
    With just a few simple steps and the included tools, the Z2 Pro is ready to use at your table in no time.
     
    Original price was: £55.90.Current price is: £53.97.
    Add to basket
    Add to wishlist